_Upper-lobe-bronchus Forceps_.--Foreign bodies rarely lodge in an upper-lobe bronchus, yet with such a problem it is necessary to have forceps that will reach around a corner. The upper-lobe-bronchus forceps shown in Fig. 27 have curved jaws so made as to straighten out while passing through the bronchoscope and to spring back into their original shape on up from the lower jaw emerging from the distal end of the bronchoscopic tube, the radius of curvature being regulated by the extent of emergence permitted. They are made in extra-light pattern, 40 cm. long, and the regular model 45 cm. long. The full-curved model, giving 180 degrees and reaching up into the ascending branches, is made in both light and heavy patterns. Forceps with less curve, and without the spiral, are used when it is desired to reach only a short distance "around the corner" anywhere in the bronchi. These are also useful, as suggested by Willis F. Manges, in dealing with safety pins in the esophagus or tracheobronchial tree. [FIG. 21.--Tucker jaws for the author's forceps. The tiny lip projecting down from the upper, and up from the lower jaw prevents sidewise escape of the shaft of a pin, tack, nail or needle. The shaft is automatically thrown parallel to the bronchoscopic axis. Drawing about four times actual size.] [36] _Tucker Forceps_--Gabriel Tucker modified the regular side-curved forceps by adding a lip (Fig. 21) to the left hand side of both upper and lower jaws. This prevents the shaft of a tack, nail, or pin, from springing out of the grasp of the jaws, and is so efficient that it has brought certainty of grasp never before obtainable. With it the solution of the safety-pin problem devised by the author many years ago has a facility and certainty of execution that makes it the method of choice in safety-pin extraction. [FIG. 22.--The author's down-jaw esophageal forceps. The dropping jaw is useful for reaching backward below the cricopharyngeal fold when using the esophageal speculum in the removal of foreign bodies. Posterior forceps-spaces are often scanty in cases of foreign bodies lodged just below the cricopharyngeus.] [FIG. 23.--Expansile forceps for the endoscopic removal of hollow foreign bodies such as intubation tubes, tracheal cannulae, caps, and cartridge shells.] _Screw forceps_.--For the secure grasp of screws the jaws devised by Dr. Tucker for tacks and pins are excellent (Fig. 21). _Expanding Forceps_.--Hollow objects may require expanding forceps as shown in Fig. 23. In using them it is necessary to be certain that the jaws are inside the hollow body before expanding them and making traction. Otherwise severe, even fatal, trauma may be inflicted. [FIG. 24.--The author's fenestrated peanut forceps. The delicate construction with long, springy and fenestrated jaws give in gentle hands a maximum security with a minimum of crushing tendency.]