Development of Gravity Pendulums in the 19th Century: Contributions from the Museum of History and Technology, Papers 34-44 On Science and Technology, Smithsonian Institution, 1966Multhauf, Robert P.
History
Development of Gravity Pendulums in the 19th Century: Contributions from the Museum of History and Technology, Papers 34-44 On Science and Technology, Smithsonian Institution, 1966
Multhauf, Robert P.
Pendulum
In the earlier suspension from jaws there was uncertainty as to the
point about which the pendulum oscillated. Borda and Cassini hung their
pendulum in front of a seconds clock and determined the time of swing by
the method of coincidences. The times on the clock were observed when
the clock gained or lost one complete vibration (two swings) on the
pendulum. Suppose that the wire pendulum makes n swings while the clock
makes 2n + 2. If the clock beats seconds exactly, the time of one
complete vibration is 2 seconds, and the time of swing of the wire
pendulum is T = (2n + 2)/n = 2(1 + 1/n). An error in the time caused by
uncertainty in determining the coincidence of clock and wire pendulum is
reduced by employing a long interval of observation 2n. The whole
apparatus was enclosed in a box, in order to exclude disturbances from
currents of air. Corrections were made for buoyancy, for amplitude of
swing and for variations in length of the wire with temperature. The
final result was that the length of the seconds pendulum at the
observatory in Paris was determined to be 440.5593 Paris lines, or
993.53 mm., reduced to sea level 993.85 mm. Some years later the methods
of Borda were used by other French investigators, among whom was Biot
who used the platinum ball of Borda suspended by a copper wire 60 cm.
long.
Another historic "simple" pendulum was the one swung by Bessel (fig. 7)
for the determination of gravity at Königsberg 1825-1827.[21] The
pendulum consisted of a ball of brass, copper, or ivory that was
suspended by a fine wire, the upper end of which was wrapped and
unwrapped on a horizontal cylinder as support. The pendulum was swung
first from one point and then from another, exactly a "toise de
Peru"[22] higher up, the bob being at the same level in each case (fig.
7). Bessel found the period of vibration of the pendulum by the method
of coincidences; and in order to avoid disturbances from the comparison
clock, it was placed at some distance from the pendulum under
observation.
Bessel's experiments were significant in view of the care with which he
determined the corrections. He corrected for the stiffness of the wire
and for the lack of rigidity of connection between the bob and wire. The
necessity for the latter correction had been pointed out by Laplace, who
showed that through the circumstance that the pull of the wire is now on
one side and now on the other side of the center of gravity, the bob
acquires angular momentum about its center of gravity, which cannot be
accounted for if the line of the wire, and therefore the force that it
exerts, always passed through the center. In addition to a correction
for buoyancy of the air considered by his predecessors, Bessel also took
account of the inertia of the air set in motion by the pendulum.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account