S is the segment of a sphere about 4·5 cm. radius, with a centre
slightly above C. L is a disc of lead about 7 cm. in diameter resting
upon the segment. Above this there is a light pointer, P, about 30
cm. long. On the top of the pointer a small cylinder of iron, W, is
balanced, and connected by a string with the catch to be relieved. When
the table on which W P S rests is shaken, rotation takes place near
to C, the motion of the base S is magnified at the upper end of the
pointer, and the weight overturned. This catch may be used to relieve
a toothed bar axled at one end, and held up above a pin projecting
from the face of the pendulum bob. When this falls it catches the
projecting pin and holds the pendulum.
Another way of relieving the toothed bar is to hold up the opposite
end to that at which it is axled by resting it on the extremity of a
horizontal wire fixed to the bob of a conical pendulum—for example, one
of the indices of a conical pendulum seismograph. The whole of this
apparatus, which may be constructed at the cost of a few pence, can be
made small enough to go inside an ordinary clock case.
The difficulty which arises with all these clock-stopping arrangements
is that it is difficult for observers situated at distant stations
to re-start their clocks so that their difference in time shall
be accurately known. Even if each observer is provided with a
well-regulated chronometer, with which he can make comparisons, the
rating of these instruments is for all ordinary persons an extremely
troublesome operation.
In order to avoid this difficulty the author has of late years used a
method of obtaining the time without stopping the clock. To do this a
clock with a central seconds hand is taken, and the hour and minute
hands are prolonged and bent out slightly at their extremities at right
angles to the face, the hour hand being slightly the longest. Each
hand is then tipped with a piece of soft material like cork, which is
smeared with a glycerine ink. A light flat ring, with divisions in it
corresponding to those on the face of the clock, is so arranged that
at the time of a shock it can be quickly advanced to touch the inked
pads on the hands of the clock and then withdrawn. This is accomplished
by suitable machinery, which is relieved either by an electro-magnet
or some other contrivance which will withdraw a catch. In this way an
impression in the form of three dots is received on the disc, and the
time known without either stopping or sensibly retarding the clock.
For ordinary observers, if a time-taker is not used in conjunction
with a record receiver, as good results as those obtained by ordinary
clock-stopping apparatus are obtainable by glancing at an ordinary
watch. Subsequently the watch by which the observation was made should
be compared with some good time-keeper, and the local time at which the
shock took place is then approximately known.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account