At the commencement we supposed one of the sectors to have a positive
charge, but it is not necessary to charge a sector specially, for the
machine is self-starting. Why this is the case is not yet thoroughly
understood, but probably the explanation is that at any particular
moment no two places in the atmosphere are in exactly the same
electro-static condition, so that an uneven state of charge exists
permanently amongst the sectors.
The Wimshurst machine provides us with a plentiful supply of
electricity, and the question naturally arises, “Can this electricity
be stored up in any way?” In 1745, long before the days of influence
machines, a certain Bishop of Pomerania, Von Kleist by name, got the
idea that if he could persuade a charge of electricity to go into
a glass bottle he would be able to capture it, because glass was a
non-conductor. So he partly filled a bottle with water, led a wire down
into the water, and while holding the bottle in one hand connected
the wire to a primitive form of electric machine. When he thought he
had got enough electricity he tried to remove his bottle in order
to examine the contents, and in so doing he received a shock which
scared him considerably. He had succeeded in storing electricity in
his bottle. Shortly afterwards the bishop’s experiment was repeated by
Professor Muschenbrock of Leyden, and by his pupil Cuneus, the former
being so startled by the shock that he wrote, “I would not take a
second shock for the kingdom of France.” But in spite of shocks the end
was achieved; it was proved that electricity could be collected and
stored up, and the bottle became known as the Leyden jar. The original
idea was soon improved upon, water being replaced by a coating of
tinfoil, and it was found that better results were obtained by coating
the outside of the bottle as well as the inside.
As now used the Leyden jar consists of a glass jar covered inside and
outside with tinfoil up to about two-thirds of its height. A wooden
lid is fitted, through which passes a brass rod terminating above in a
brass knob, and below in a piece of brass chain long enough to touch
the foil lining. A Leyden jar is charged by holding it in one hand with
its knob presented to the discharging ball of a Wimshurst machine,
and even if the machine is small and feeble the jar will accumulate
electricity until it is very highly charged. It may now be put down on
the table, and if it is clean and quite dry it will hold its charge for
some time. If the outer and inner coatings of the jar are connected by
means of a piece of metal, the electricity will be discharged in the
form of a bright spark. A Leyden jar is usually discharged by means
of discharging tongs, consisting of a jointed brass rod with brass
terminal knobs and glass handles. One knob is placed in contact with
the outer coating of foil, and the other brought near to the knob of
the jar, which of course is connected with the inner coating.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account