The ideal between these two conditions would be a compromise, which included the characteristics of both _series_ and _shunt_ effects. That is exactly what the _compound_ dynamo effects. A compound dynamo is a shunt dynamo with just enough series turns on its field coils, to counteract the de-magnetizing effect of the armature at full load. A machine can be designed to make the voltage rise gradually, or swiftly, by combining the two systems. For country homes, the best combination is a machine that will keep the voltage constant from no load to full load. A so-called _flat-compounded_ machine does this. In actual practice, this voltage rises slightly at the half-load line--only two or three volts, which will not damage the lamps in a 110-volt circuit. The compound dynamo is therefore self-regulating, and requires no attention, except as to lubrication, and the incidental care given to any piece of machinery. Any shunt dynamo can be made into a compound dynamo, by winding a few turns of heavy insulated wire around the shunt coils, and connecting them in "series" with the external circuit. How many turns are necessary depends on conditions. Three or four turns to each coil usually are sufficient for "flat compounding." If the generating plant is a long distance from the farm house where the light, heat, and power are to be used, the voltage drops at full load, due to resistance of the transmission wires. To overcome this, enough turns can be wound on top of the shunt coils to cause the voltage to rise at the switchboard, but remain stationary at the spot where the current is used. The usual so-called flat-compounded dynamo, turned out by manufacturers, provides for constant voltage at the switchboard. Such a dynamo is eminently fitted for the farm electric plant. Any other type of machine is bound to cause constant trouble and annoyance. [Illustration: Connections of a compound dynamo] CHAPTER VI WHAT SIZE PLANT TO INSTALL The farmer's wife his partner--Little and big plants--Limiting factors--Fluctuations in water supply--The average plant--The actual plant--Amount of current required for various operations--Standard voltage--A specimen allowance for electric light--Heating and cooking by electricity--Electric power: the electric motor.