Distillation, as hath been already said, is an operation by which we separate from a body, by the help of a gradual heat, the several principles of which it consists. There are three methods of distilling. The first is performed by applying the heat over the body whose principles are to be extracted. In this case, as the liquors, when heated and converted into vapours, constantly endeavour to fly from the center of heat, they are forced to re-unite in the lower part of the vessel, that contains the matter in distillation, and so passing through the pores or holes of that vessel, they fall into another cold vessel applied underneath to receive them. This way of distilling is on this account called distilling _per Descensum_. It requires no other apparatus than two vessels figured like segments of hollow spheres, whereof that which is pierced with little holes, and intended to contain the matter to be distilled, should be much less than the other, which is to contain the fire, and to fill its aperture exactly; the whole together to be supported vertically upon a third vessel, which is to serve the purpose of a recipient, admitting into its mouth the convex bottom of the vessel containing the matter to be distilled, which must accurately fill it. This method of distilling is but little used. The second method of distilling is performed by applying the heat underneath the matter to be decomposed. On this occasion the liquors being heated, rarefied, and converted into vapours, rise, and are condensed in a vessel contrived for that purpose, which we shall presently describe. This way of distilling is called distilling _per Ascensum_, and is much used. The vessel in which this distillation _per Ascensum_ is performed we call an _Alembic_. There are several sorts thereof, differing from one another both in the matter of which, and the manner in which, they are made. Those employed to draw the odoriferous waters and essential oils of plants are generally made of copper, and consist of several pieces. The first, which is designed to contain the plant, is formed nearly like a hollow cone, the vertex whereof is drawn out in the shape of a hollow cylinder or tube: this part is named the _Cucurbit_, and its tube the _Neck_ of the _Alembic_. To the upper end of this tube another vessel is soldered: this is called the _Head_, and commonly has likewise the form of a cone, joined to the neck of the alembic by its base, round which, on the inside, is hollowed a small groove, communicating with an orifice that opens at its most depending part. To this orifice is soldered a small pipe in a direction sloping downwards, which is called the _Nose_, _Spout_, or _Beak_ of the alembic.