In connexion with metallic conductors, it is a fact of great interest
and considerable practical importance, that, although the majority of
metals when in a finely divided or powdered condition are practically
non-conductors, a mass of metallic powder or filings may be made to pass
suddenly into a conductive condition by being exposed to the influence
of an electric wave. The same is true of the loose contact of two
metallic conductors. Thus if a steel point, such as a needle, presses
very lightly against a metallic plate, say of aluminium, it is found
that this metallic contact, if carefully adjusted, is non-conductive,
but that if an electric wave is created anywhere in the neighbourhood,
this non-conducting contact passes into a conductive state. This fact,
investigated and discovered independently by D. E. Hughes, C. Onesti, E.
Branly, O. J. Lodge and others, is applied in the construction of the
"coherer," or sensitive tube employed as a detector or receiver in that
form of "wireless telegraphy" chiefly developed by Marconi. Further
references to it are made in the articles ELECTRIC WAVES and TELEGRAPHY:
_Wireless_.
_International Ohm._--The practical unit of electrical resistance was
legally defined in Great Britain by the authority of the queen in
council in 1894, as the "resistance offered to an invariable electric
current by a column of mercury at the temperature of melting ice,
14.4521 grammes in mass, of a constant cross-sectional area, and a
length 106.3 centimetres." The same unit has been also legalized as a
standard in France, Germany and the United States, and is denominated
the "International or Standard Ohm." It is intended to represent as
nearly as possible a resistance equal to 10° absolute C.G.S. units of
electric resistance. Convenient multiples and subdivisions of the ohm
are the microhm and the megohm, the former being a millionth part of
an ohm, and the latter a million ohms. The resistivity of substances
is then numerically expressed by stating the resistance of one cubic
centimetre of the substance taken between opposed faces, and expressed
in ohms, microhms or megohms, as may be most convenient. The
reciprocal of the ohm is called the mho, which is the unit of
conductivity, and is defined as the conductivity of a substance whose
resistance is one ohm. The absolute unit of conductivity is the
conductivity of a substance whose resistivity is one absolute C.G.S.
unit, or one-thousandth-millionth part of an ohm. Resistivity is a
quality in which material substances differ very widely. The metals
and alloys, broadly speaking, are good conductors, and their
resistivity is conveniently expressed in microhms per cubic
centimetre, or in absolute C.G.S. units. Very small differences in
density and in chemical purity make, however, immense differences in
electric resistivity; hence the values given by different
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account