The eye glasses and the body glasses are contained in a tube which fits into the exterior tube A B; by pulling out a little this tube, when the microscope is in use, the magnifying power of each lens is increased. The body A B of the microscope is supported by the arm C D; this arm is moveable in a square socket cut in the head that is connected to the main pillar E F, which is screwed firmly to the mahogany pedestal G H; there is a drawer to this pedestal, which holds the apparatus. This arm may be slid backwards and forwards in its socket, carrying the magnifiers and the body of glasses, and also turned horizontally quite round upon the pillar, giving a general motion all over the object on the stage below; which is a material improvement and advantage of this microscope over a similar one described in the former edition of this work, as any unavoidable motion of the living object to be viewed may be followed, by the observer’s hand moving the arm C D as the object changes its place. N I S is the plate or stage which carries the slider-holder K, this stage is moved up or down the pillar E F, by turning the milled nut M; this nut is fixed to a pinion, that works in a toothed rack cut on one side of the pillar. By means of this pinion the stage may be gradually raised or depressed, and the object adjusted to the focus of the different lenses. K is the slider-holder, which fits into a hole that is in the middle of the stage N I S; it is used to confine and guide either the motion of the sliders which contain the objects, or the glass tubes that are designed to confine small fishes, for viewing the circulation of the blood. The sliders and tubes are to be passed between the two upper plates. L is a brass tube, in the upper part of which is fixed the condensing lens before spoken of; it screws into the wire arm a, which is placed in the hole I of the stage, with the glass underneath, and may be set at different distances from the object, according to its distance from the mirror or the candle. O is the frame which holds the two reflecting mirrors, one of which is plane, the other concave. These mirrors may be moved in various directions, in order to reflect the light properly, by means of the pivots on which they move, in the semicircle Q, and the motion of the semicircle itself on the pin R; the concave mirror generally answers best in the day-time; the plane mirror combines better with the condensing lens in L, and a lamp or candle at night. At S is a hole and slit for receiving either the nippers _b_, or the fish-pan _c_; when these are used, the slider-holder K must be removed. T, a hole to receive the pin of the convex lens and illuminator _d_.