The first system is the one generally used on all American gun carriages except the 155-mm Howitzer. It gives ease and speed in the manipulation of the piece in traverse, but has the disadvantage of rendering the carriage less stable in firing due to the fact that the direction of recoil of the gun is in the direction of the line joining the trail spade and the central pivot, _only_ when the gun is absolutely in the center of its traverse. In all other positions, which will be the usual case, there is a component at right angles to the line of trail spade-central pivot which tends to throw the gun off from its proper direction making it necessary to relay each time the gun is fired. The second method is that in use on the French 75-mm gun and the French and American 155 howitzer. While not so easy of manipulation and giving less freedom of movement in traverse (about 106 mils) it still has the advantage in that it gives greater stability in firing due to the fact that the gun always recoils along the line through the trail spade, perpendicular to the axle. ELEVATING MECHANISMS. There are two general classifications of gun carriages according to the manner in which the laying for elevation is effected. The 3” gun is an example of one type in which the total quadrant angle of departure is laid off as one angle necessitating at each resetting of a range a new resetting of the range bubble. It is evident that this militates against both speed and accuracy in laying for elevation. The other type is illustrated by the American 75 and by the French and British 75-mm gun carriages which have what is called the “independent line of site.” It differs from the other type in that there is placed between the top carriage and the cradle an intermediate carriage or rocker arm pivoting on the gun trunnions at one end, and carrying at the other the support for the elevating device which gives to the cradle and the gun the proper elevation for the range. This intermediate carriage or rocker arm has a toothed edge geared with a pinion fastened to the trail flask, by means of which, gun cradle and elevating device may be moved in elevation without disturbing the relation between itself and the gun, this being done by gears independent of the elevating mechanism. An angle of site may be set off for the intermediate carriage and after the bubble is centered this actuating pinion may be blocked and no further concern be paid to the angle of site. A cannoneer therefore has only to set his range accurately on the index to give the changes in range ordered.