Impure air, or sulphuretted hydrogen, browns or blackens white lead, converting it partially or wholly into sulphide. It would appear from the recent investigations of Dr. D. S. Price, that white lead is less liable to be thus affected, when the pictures in which it is used are exposed to a strong light; also, that when such pictures have so suffered, a like exposure will restore them. We have ourselves noticed the rapidity with which an oil rub of white lead that has been damaged by foul gas, regains its former whiteness when submitted to air and sunshine. The action of drying oils has been likewise proved to be very powerful upon sulphide of lead, an exposure to light for a few days only being sufficient to change a surface of it, coated with a thin layer of boiled linseed oil, into a white one. Probably, these agents may have a similar effect upon other pigments injured by sulphuretted hydrogen, and many of the colours in paintings may be restored by treating them with boiled linseed oil, and submitting them to a strong light. That the result is due to oxidation, there can be no doubt. Indeed, the eminent French chemist, M. Thénard, was consulted some years back upon the means of bringing to their original whiteness the black spots which had formed upon a valuable drawing, by the changing of the white lead, and employed for that purpose oxygenated water. He had ascertained its power of converting the black sulphide of lead into the white sulphate, and, by touching the spots with a brush dipped in the fluid, soon succeeded in restoring the drawing to its primitive state. Here, again, the use of the agent might doubtless be extended to other colours, to which foul air is inimical. In oil painting white lead is essential in the ground, in dead colouring, in the formation of tints of all colours, and in scumbling, either alone or mixed with other pigments. It is also the best local white, when neutralized with ultramarine or black; and it is the true representative of light, when warmed with Naples yellow, or orange vermilion or cadmium, or with a mixture of the yellow and either of the orange pigments, according to the light. Ordinary white lead is often mixed with considerable quantities of heavy spar, gypsum, or chalk. These injure it in body and brightness, dispose it to dry more slowly, keep its place less firmly, and discolour the oil with which it is applied, as well as prevent it dissolving completely in boiling dilute potash-ley, a test by which pure white lead may be known.