The first gas-burner was a very simple and unpretentious contrivance. In one of the earliest works on gas lighting[1] we read: "The extremities of the pipes have small apertures, out of which the gas issues; and the streams of gas, being lighted at those apertures, burn with a clear and steady flame as long as the supply of gas continues." Familiar as it is to us, and from its familiarity unnoticed, the phenomenon presented by the flame thus produced continuing to burn "as long as the supply of gas continued," was doubtless, to the first experimenters, a wonderful sight. Though we may smile at the question, it is not difficult to understand the incredulity of the honourable member who, when Murdock was examined before a Committee of the House of Commons, in 1809, asked the witness: "Do you mean to tell us that it will be possible to have a light _without a wick_?" "Yes; I do indeed," replied Murdock. "Ah, my friend," replied the member, "you are trying to prove too much." [1] Accum's "Treatise on Gas-Lights." Third edition, 1816. [Sidenote: The dawn of gas lighting.] It was but natural, seeing that oil-lamps and candles were the only forms of artificial illumination in use prior to the introduction of gas lighting, that the earliest attempts at illumination by gas should be in imitation of the effects produced by those means. Accordingly we find that one of the first gas-burners employed was the Argand, modelled upon the oil-lamp of that name, which had been found to give superior results; while in more general use, and for some time almost the sole apparatus available, were single jets, giving a flame similar in appearance to that of a common candle, together with various combinations of these jets. A fair idea of the mode of illumination practised during the earliest period of gas lighting may be gleaned from the following extract from a paper describing the lighting of Messrs. Phillips and Lee's cotton-mill at Manchester, read before the Royal Society, in 1808, by Mr. William Murdock:-- The gas-burners are of two kinds. The one is upon the principle of the Argand lamp, and resembles it in appearance; the other is a small curved tube with a conical end, having three circular apertures or perforations, of about 1-30th of an inch in diameter, one at the point of the cone, and two lateral ones, through which the gas issues, forming three divergent jets of flame, somewhat like a fleur-de-lis. The shape and general appearance of this tube has procured for it, among the workmen, the name of the "cockspur" burner. [Illustration: FIG. 1.--EARLY GAS-BURNERS. (From Accum's "Treatise on Gas-Lights.")] Nor was much advance made upon these arrangements down to the year 1816, judging from Accum's "Treatise" (before cited), as the subjoined extract from that work, together with the above illustrations, will show:--