Rim locks are generally constructed of cast-iron, and in selecting them, a careful inspection should be made of the internal mechanism, choosing only those rim locks in which the bolts and the tumblers are constructed of steel or brass. Rim locks, however, are also made of all steel, and these are coming into general use. They present a somewhat better appearance than cast-iron locks, as may be seen from Fig. 37. The cast-iron rim lock may also be obtained with an ornamental case. These cast-iron cases, as a rule, are finished in imitation of bronze. Such rim locks, however, are not in general use on account of their somewhat higher cost, and from the fact that their appearance is not greatly improved by the ornamentation. [Illustration: FIG. 38] =Cheap mortise locks=, or =sets=, are also largely used for the more common grades of work. They are sold in sets, that is, with escutcheon plates, etc. of steel or cast-iron, both in plain and ornamental designs, as illustrated in Fig. 38. The cheapest lock sets are fitted with pottery knobs, and the better grade, with metal knobs. All of these locks described are of poor construction, as quality is a secondary consideration. [Illustration: FIG. 39] =36. Medium-Grade Mortise Locks.=—The locks grouped under the term “medium-grade” hardware have been greatly improved in recent years and are adapted to a large range of uses, but they are especially made for residence work. In dwellings of the better class, the best types of rim locks are used for doors in attics and basements, and for closet doors, but for all other doors, the =medium-grade mortise locks= are used. These locks are provided with cast- or wrought-bronze lock fronts, are made with from one to three lever tumblers, and have drop-forge steel cases. The locks are constructed with easy springs, which allow the latch bolt to retreat within the case on one light spring when the door is closed, and when the knob is turned, to operate the latch, both springs act jointly in order to overcome the friction of the knob and to throw the bolt back to central position. The mechanism of an easy-spring, mortise knob lock is illustrated in Fig. 39. [Illustration: FIG. 40] In the group of locks embodying those of medium quality are included the three-bolt locks used for chamber and exterior doors, locks for communicating doors between chambers, and twin, or two-bolt, locks for twin bathroom or toilet-room doors, these being respectively illustrated in Fig. 40 (_a_), (_b_), and (_c_). All of these locks should be used with wrought- or cast-bronze trim, either plain or in design, and in finishes to suit. Locks for exterior doors, where security is important, should be selected with this object in view, and three-tumbler, or three-bolt, locks should be used.