Plates and handles for the combined store-door lock and latch are also made in many sizes and styles, from the plain rectangular type to the most ornamental forms. Such trim offers good opportunity for effective decoration, and no embellishment is so effective for a store’s entrance door as a pair of handsome plates and handles of appropriate design. For such trim, it is not uncommon to provide an outlay of from $25 to $30 per door. Some of the more elaborate store-door handles are illustrated in Figs. 50 and 51. The trim illustrated in these plates is very carefully selected by the architect to match the style of architecture in which the building is designed, and the finish is selected with as much care. =46. Padlocks.=—While =padlocks= are not ordinarily included in builders’ hardware, they are extensively used for factories, stables, and other buildings of this character; thus some care should be taken in their selection. Padlocks are made in a great variety of sizes, styles, and qualities, and retail at prices ranging from 10 cents, or less, to $5. Where these locks are exposed to moisture or to the weather, they should be of bronze or of brass, with all of the interior construction of the same material. If required for great security, that is, for places where they are likely to be subjected to violence, they should be very heavy, and preferably provided with steel shackles. Padlocks constructed on the cylinder-lock principle may be obtained, and should always be used where a series of locks that are operated by separate keys and controlled by a master key is employed. Ordinarily, a selection of padlocks should be made only after an inspection of the actual samples, and not according to catalog representations. [Illustration: FIG. 50] [Illustration: FIG. 51] =47. Cabinet Locks.=—The locks used in cabinetwork are distinct from builders’ locks, though they are occasionally used in the construction of the finer classes of interior finish, and, consequently, are of interest to the architect. =Cabinet locks= are made chiefly of wrought metal, and in a vast variety of kinds, sizes, and grades, so that care should be exercised in their selection. The leading kind of cabinet locks are drawer, or till, locks; wardrobe, or cupboard, locks; and chest, box, and desk locks. Special locks are also manufactured for many other purposes. For the best work, the Yale, or pin-tumbler, type is desirable where great security is required, but for ordinary uses, other types, with either flat or round keys are available. Many of the cabinet locks admit of being master-keyed, and such locks are employed on lockers in club rooms, armories, etc. [Illustration: FIG. 52]