Hertzian Wave Wireless TelegraphyFleming, J. A. (John Ambrose), Sir
Science
Hertzian Wave Wireless Telegraphy
Fleming, J. A. (John Ambrose), Sir
Electric waves; Telegraph, Wireless
When the Wehnelt break is applied to an ordinary ten-inch induction
coil, and the inductance of the primary circuit and the electromotive
force varied until the break interrupts the current regularly and with
the frequency of some hundred a second, the character of the secondary
discharge is entirely different from its appearance with the ordinary
hammer break. The thin blue lightning-like sparks are then replaced by a
thicker mobile flaming discharge, which resembles an alternating-current
arc, and, when carefully examined or photographed, is found to consist
of a number of separate discharges superimposed upon one another in
slightly different positions.
Many theories have been adopted as to the action of the break, but
time will not permit us to examine these. Professor S. P. Thompson and
Dr. Marchant have suggested a theory of resonance.[14] One difficulty
in explaining the action of the break is created by the fact that it
will not work if the platinum wire is made a cathode.
Although the Wehnelt break has some advantages in connection with the
use of the induction coil for Röntgen ray work, its utility as far as
regards Hertzian wave telegraphy is not by any means so marked. It has
already been explained that, in order to charge a condenser of a given
capacity at a constant voltage, the electromotive force must be
applied for a certain minimum time, which is determined by the value
of the capacity and the resistance of the secondary circuit of the
induction coil. If the coil is a ten-inch coil and has a secondary
resistance of, say, 6,000 ohms, and if the capacity to be charged has
a value, say, of one-thirtieth of a microfarad, then the time-constant
of the circuit is 1/5,000 of a second. Therefore, the contact with the
condenser must be maintained for at least 1/500 of a second, during
the time that the secondary electromotive force of the coil is at its
maximum, so that the condenser may become charged to a voltage which
the coil is then capable of producing.
In the induction coil, the electromotive force generated in the
secondary coil at the "break" of the primary current is higher than
that at the "make," and this electromotive force, other things being
equal, depends upon the rate at which the magnetism of the iron core
dies away, and its duration is shorter in proportion as the whole time
occupied in the disappearance of the magnetism is less. The Wehnelt
break does not increase the actual secondary electromotive force, nor
apparently its duration, but it greatly increases the number of times
per second this electromotive force makes it appearance. Hence this
break increases the current, but not the electromotive force in the
secondary coil. It, therefore, does not assist us in the direction
required--viz., in prolonging the duration of the secondary
electromotive force to enable larger capacities to be charged.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account