Improvement in the arts of spinning and weaving caused the textile establishments and population of north England to go forward by leaps and bounds. Previous to the invention of the “fly shuttle” in 1733 by John Kay of Bury, the weaver had to throw the shuttle through the warp by hand. Weaving became much more rapid; also by having several shuttles with different-colored yarn stripes and checks could be woven into the cloth. Since weaving had been made quicker and easier there came a demand for more yarn. Three separate inventions satisfied this, viz., James Hargreaves of Blackburn invented his “jenny” about 1767, by which eight threads could be spun at once. At the same time Richard Arkwright, a barber of Preston, invented and developed the throstle spinning frame (1769-1775). Samuel Crompton, about 1775, invented his spinning “mule,” which seemed to combine the good principles of the others. Power was applied to spinning about 1785 and then it was weaving that needed accelerating. To Cartwright in 1784 is ascribed the honor of inventing the power loom. Other inventions for both spinning and weaving have made almost automatic the running of thousands of spindles and hundreds of looms in a single factory. =Railways Developed.=--With power manufacturing and increased production due to the adoption of improved factory systems came still greater demand for transportation. Tramways had already been laid in 1676 for transporting coal from the mines to the sea. The rails were first made of scantling laid in the wheel ruts, then of straight rails of oak on which “one horse would draw from four or five chaldrons of coal.” Later (1765) cast-iron trammels 5 feet long by 4 inches wide were nailed to the wooden rails. These trammels collected dust, therefore in 1789 Jessop laid down at Loughborough cast-iron edge-rails and put a flanged wheel on the waggon. The rails were also placed on chairs and sleepers (ties), the first instance of this method. The distance apart of the rails was 4 feet 8¹⁄₂ inches, what is now known as “standard gauge.” The success of these coal roads suggested tramways for freight and for passenger transportation between the larger towns. The canals had become congested with much traffic; it is said that notwithstanding there were three between Liverpool and Manchester the merchandise passing “did not average more than 1200 tons daily.” The average rate of carriage was 18s. ($4.37) per ton, and the average time of transit on the 50 miles of canal was thirty-six hours. The conveyance of passengers by the improved coach roads, was, for then, quite rapid but rather expensive.