Home labor saving devicesScott, Rhea C. (Rhea Clarke)
General
Home labor saving devices
Scott, Rhea C. (Rhea Clarke)
Home economics; Woodwork
While this jelly strainer is unique and useful in its construction
it is not adjustable. It is made of poplar at a minimum cost. Around
the top edge are arranged little brass hooks. These are put at equal
distances apart. At the lower end of the trough two plugs are put, one
above the other, through which the jelly juice flows out into a pan
placed beneath the plugs.
[Illustration]
The jelly bag is made of an oblong piece of flannel with ivory rings
sewed around the edges so as to hang the bag on the brass hooks around
the top of the frame.
MATERIALS:
4’ of poplar.
4 No. 9 screws, 1½”, to fasten handles on the sides.
16 No. 10 screws, 2”, to fasten ends on the sides.
5 No. 10 screws, 1¼”, to fasten the sides together at the bottom.
14 brass cup hooks arranged around the top edges.
14 white ivory rings to be sewed on jelly bag.
1 yd. white flannel for jelly bag.
DIMENSIONS:
_Sides_: 2 pieces 1” thick × 12” wide × 15½” long.
_Ends_: 2 pieces 1” thick × 12½” wide × 17½” long.
_Handles_: 2 pieces 1” thick × 2½” wide × 4” long.
_Plugs_: 2 pieces 1” thick × 1” wide × 3” long.
DIRECTIONS:
Saw the two end pieces according to the illustration. Measure
6½” from the bottom of each end and cut them out ¼” to fit sides
(1” thick) placing the sides ¾” from the outer side of the end
pieces. Measure equal spaces from each side of the ends and put
the handles 1½” from the top edge. Bore two holes ¾” in diameter
near the bottom of the end to fit the plugs. Bevel the two
sides (1” × 12” × 15½”) at the bottom so as to make a tight and
neat joint. Screw the end pieces to the sides. Screw the brass
cup hooks at equal distances apart around the top edge of the
strainer.
[Illustration]
DISH DRAINER
The work of dish-washing is greatly reduced by the use of a dish
drainer. The dishes are carefully washed and arranged in the drainer,
and boiling water poured over them. When they are dry, they can be put
away or allowed to stand with a clean cloth thrown over them until
ready to use.
This dish drainer resembles a box in shape, put on legs, with slats
placed inside at equal distances apart, making the compartments to hold
the dishes. The space in front is made a little larger to accommodate
the irregular dishes. An experienced housewife will know that glassware
and silverware cannot be dried by this method. A hole is made in one
corner of the drainer through which the water drains off into a pail
which is kept under the corner.
MATERIALS:
16’ of white pine.
½ lb. of 4-penny nails for nailing slats in box.
½ lb. of 8-penny nails for nailing box on the legs.
4½’ of sheet zinc to cover the inside of drainer.
4” of half-galvanized pipe for drainage tube.
1 drainage pail.
Sandpaper.
1 can of white paint.
1 can of white enamel.
DIMENSIONS:
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account