Industrial arts; Technology -- Juvenile literature
The ugliest of all the work is the cutting of the slots in which the
springs are put. These are first cut by a machine; but if the man who
operates it is not careful, he will get some of his fingers cut off. But
after the slot-cutting machine does its work, there is yet something to
be done by another man with a knife before the spring can be put in.
After the springs are set, the ferule is put on, and when natural sticks
are used, as all are of different sizes, it requires considerable time
and care to find a ferule to fit the stick, as well as in whittling off
the end of the stick to suit the ferule. And before going any farther you
will notice that all the counters in the various work-rooms are carpeted.
The carpet prevents the polished sticks from being scratched, and the
dust from sticking to the umbrella goods.
[Illustration: FINISHING THE HANDLE.]
After the handle is put on the stick and a band put on for finish or
ornament, the stick goes to the frame-maker, who fastens the stretchers
to the ribs, strings the top end of the ribs on a wire which is fitted
into the "runner notch;" then he strings the lower ends of the
"stretchers" on a wire and fastens it in the "runner," and then when both
"runners" are securely fixed the umbrella is ready for the cover.
As this is a very important part of the umbrella, several men and women
are employed in making it. In the room where the covers are cut, you will
at first notice a great number of V shaped things hanging against the
wall on either side of the long room. These letter Vs are usually made of
wood, tipped all around with brass or some other fine metal, and are of a
great variety of sizes. They are the umbrella cover patterns, as you soon
make out. To begin with, the cutter lays his silk or gingham very
smoothly out on a long counter, folding it back and forth until the
fabric lies eight or sixteen times in thickness, the layers being several
yards in length. (But I must go back a little and tell you that both
edges of the silk, or whatever the cover is to be, has been hemmed by a
woman, on a sewing machine before it is spread out on the counter). Well,
when the cutter finds that he has the silk smoothly arranged, with the
edges even, he lays on his pattern, and with a sharp knife quickly draws
it along two sides of it, and in a twinkling you see the pieces for
perhaps two umbrellas cut out; this is so when the silk, or material, is
sixteen layers thick and the umbrella cover is to have but eight pieces.
After the cover is cut, each piece is carefully examined by a woman to
see that there are no holes nor defects in it, for one bad piece would
spoil a whole umbrella.
Then a man takes the pieces and stretches the cut edges. This stretching
must be so skilfully done that the whole length of the edge be evenly
stretched. This stretching is necessary in order to secure a good fit on
the frame.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account