The second floor will be used for the storage of the lighter machines such as small plows, harrows, drills and all the lighter tools which make up the farmer’s equipment; while the first floor will be utilized for the storage of the heavier machines such as binders, wagons, etc. Getting the lighter machines up to the second floor may be accomplished in one of two ways. An ordinary block and tackle can be utilized either through an outside door in the gable of the roof or through a hole in the floor in the interior of the building. If space is available the construction of a rather steep runway outside the building and leading to the second floor may be advantageous. This runway can be constructed of rather light material, using a pair of 4x6’s for joists, and flooring them with rough 2-inch stuff. An angle of 30 degrees with the horizontal will make it possible to pull machines up the runway with only a small amount of labor. This arrangement has been found to be superior to the use of a hoist. It can be used to the best advantage when the shed is located on the slope of a rather steep hill. TABLE I. Floor Space and Height of Space Required to House Common Farm Implements. Floor Height Space of Space Implements-- in Feet in Feet Plows-- Walking 8x3 3 Sulky and horse gang (tongue off; add 10 ft. for tongue) 8x6 4 Engine gang 16x7 5 Harrows-- Spike tooth, per section 5x5 2 Spring tooth, per section 5x4 1½ Single disc, 8 ft. with truck (tongue off) 6x9 4 Double disc, 7 ft. with truck (tongue off) 8x8 4 Weeder-- (Thills on) 13x8 4 Grain Drills-- 12x7 (tongue off; add 10 ft. for tongue) 5x8 5 16x7 with press attachment (tongue off) 7x11 5 Rollers-- Smooth 3x10 4½ Corrugated, single (tongue off; add 10 ft. for tongue) 3x10 4 Corrugated, double 4x8 4 Corn Planter-- Two row (tongue off; add 10 ft. for tongue) 5½x6 3½ Cultivators-- Walking, one horse 7x2 3½ Riding, single row (tongue off; add 10 ft. for tongue) 8x5 4 Riding, two row (tongue off; add 10 feet for tongue) 8x10 4 Alfalfa (tongue off; add 10 ft. for tongue) 7x6 5 Mower-- 6 ft. (tongue off; add 10 ft. for tongue) 5x6 7