1. =Headworks.=--In the design of head works no very precise rules can be laid down. Some general ideas can however be given as to the chief points to be attended to and some general and approximate rules stated. In every case a large scale plan of the river is of course required and also a close examination of it and study of its character. An attempt to forecast its action is then possible. Gauge readings for several years and calculations of discharges are of course necessary. If the bed of the river, in course of time, rises upstream of the weir or scours downstream of it, a large amount of protection to the bed and banks will become necessary. Some description of headworks and weirs, with a plan of the headworks of the Sirhind Canal, India, has been given in _River and Canal Engineering_, CHAPTERS IV. and X. Remarks regarding the collection of information for such works are given in CHAPTER II. of the same work. It is also explained how, by keeping the gates of the under-sluices closed, a “pond” is formed between the divide wall and the canal head so that heavy sand deposits in the pond and does not enter the canal. By closing the canal and opening the under-sluices the deposit is scoured away. The best site for the headworks of a canal depends on the stability and general character of the bed of the river but in deciding between any two proposed sites, the question of the additional cost of the canal, if the upper site is adopted, has to be taken into account. Such cost may, in rugged country, be considerable. In the case of Indian perennial canals, the head is often close to the hills where the river bed is of boulders and shingle and fairly stable, but it is often at a distance from the hills and in such cases a gradual rise in the bed of the river, even in the absence of a weir, is more probable than scour. Such a rise may necessitate a raising of the crest of the weir and of the bed of the canal. [Illustration: FIG. 5.]