[Illustration: Gathering treads] Make the skirt band 1. Measure your waist. Add 2½ inches. This will give you the length needed for your skirt band. Cut your band 6½ inches wide. 2. Press a ½-inch fold along one side of your band. From the folded edge divide the rest into three sections. This gives three 2-inch sections. Make the section with the ½-inch fold slightly shorter than the other two sections. Press. 3. The section with the ½-inch fold is the front of your band. Stitch criss-cross through the back part of the band. You can stitch straighter if you make a guide or pattern. Cut a strip of waxed paper the length and width of your band, 24 x 2 inches. [Illustration: Cross-stitched band] Fold it in six equal sections. Then fold it diagonally. Then diagonally again. Open the paper and pin it to the band and follow the creases in the paper. This will give practice on starting and stopping the machine and on turning corners. Tear the paper away after the stitching is completed. [Illustration: Folded paper for band] 4. Stitch a ½-inch seam at the ends of the band. Turn and press. Do not sew the ½-inch fold at the bottom of band into the seam. Gather in fullness Divide both your skirt and the skirt band into eight equal parts to help you make the gathers even in your skirt. Do not include the placket or 1-inch overlap at the end of the band. Mark with colored threads. Mark the skirt band so the extension or extra length will be on the back of the placket. The front of band will be even with the front edge of the placket. Pin and stitch band to skirt. Pin the pieces together, right side of skirt to right side of band. Match dividing marks that you have made. Gently pull on the gathering threads at the side seams, the center front, and the center back. Pull the threads until they are the same length as the band. Work with the gathers until they are even. Baste and stitch along ½-inch fold on the skirt band. Top stitch the band Fold the double section of your band toward the back and baste the edge of the band to the skirt. Baste it so the folded edge hangs just below the stitching you just made on the front side of the band. Machine stitch from the front side of the band. Place the stitching as near the edge of the band as you can. Press before you stitch. It will flatten the seam and make stitching easier. Press your skirt Press your skirt. Use a dampened cheese-cloth and an iron set for ironing cotton, or use a steam iron. A skirt must be well pressed and fresh looking to be pretty. [Illustration: Pressed skirt] Fastenings for the skirt [Illustration: Fastenings]