Also, the first laser was a pulsed device. Light energy was pumped in and a bullet of energy emerged from it. Then the whole process had to be repeated. Pulsed operation is fine for spot-welding and for applications such as radar-type rangefinding, where pulses of energy are normally used anyway. With lasers smaller objects can be detected than when using the usual microwaves. But a pulsed process is not useful for communications. In other words, pulsing is good for certain applications but not for others. And of course solid crystals are difficult to manufacture. Hence, it was natural for laser pioneers to look hopefully at gases. Gas lasers would be easier to make—simply fill a glass tube with the proper gas and seal it. But other advantages would accrue. For one thing the relatively sparse population of emitting atoms in a gas provides an almost ideally homogeneous medium. That is, the emitting atoms (corresponding to chromium in the ruby crystal) are not “contaminated” by the lattice or host atoms. Since only active atoms need be used, the frequency coherence of a gas laser would probably be even better than that of the crystal laser, they reasoned. It was less than a year after the development of the ruby laser that Ali Javan of Bell Telephone Laboratories proposed a gas laser employing a mixture of helium and neon gases. This was an ingeniously contrived partnership whereby one gas did the energizing and the other did the amplifying. Gas lasers now utilize many different gases for different wavelength outputs and powers and provide the “purest” light of all. An additional advantage is that the optical pumping light could be dispensed with. An input of radio waves of the proper frequency did the job very nicely. But most significant of all, Javan’s gas laser provided the first continuous output. This is commonly referred to as CW (continuous wave) operation. The distinction between pulsed and CW operation is like the difference between baking one loaf of bread at a time and putting the ingredients in one end of a baking machine and having a continuous loaf emerge at the other. When a non-expert thinks of a laser, he is apt to think of power—blinding flashes of energy—as illustrated in Figure 26. As we know, this is only a small part of the capability of the laser. Nevertheless, since lasers are often specified in terms of power output it may be well to discuss this aspect. The two units generally used are _joules_ and _watts_. You are familiar with a watt and have an idea of its magnitude: think, for example, of a 15-watt or a 150-watt bulb. A watt is a unit of _power_; it is the rate at which (electrical) work is being done. [Illustration: Figure 26 _High power is demonstrated as a laser beam blasts through metal chain._]