Machine gun manual : $b a complete manual to machine gunnery, containing details of Maxim, Vickers, Lewis, Colt, Hotchkiss, together with drill (elementary and advanced) fire orders, notes from the front and a mass of other useful informationDouglas, H. (Composer)
History
Machine gun manual : $b a complete manual to machine gunnery, containing details of Maxim, Vickers, Lewis, Colt, Hotchkiss, together with drill (elementary and advanced) fire orders, notes from the front and a mass of other useful information
Douglas, H. (Composer)
Machine gun drill and tactics; Machine guns
_Indication._ │ „ │(2) Defective │
That there has │ │ammunition. │
been no │ │ │
explosion, or, if│ │ │
any, that there │ │ │
has been little │ │ │
or no recoil, the│ │ │
lock remaining in│ │ │
its forward │ │ │
position. │ │ │
„ │(_b_) If (_a_) │(_b_) (1) Broken │
│fails, place the │or damaged firing│
│crank handle on │pin. │
│to the buffer │ │
│spring twice, │ │
│change the lock, │ │
│and re-load. │ │
„ │ „ │(2) Broken lock │
│ │spring. │
│ │ │
─────────────────┴─────────────────┴─────────────────┴─────────────────
NOTE.—If the continued lightening of the fusee spring results in the
crank handle stopping in the third position, take muzzle attachment into
use, and put fusee spring back to normal weight (see para. 44).
NOTE.—Worn or damaged side or extractor levers may result in the
extractor being unable to rise, or if the side levers are bent, there
may either be a succession of separated cases, or the lock may become
jammed.
The causes of prolonged stoppages are so varied that they cannot be set
out in detail. The following are amongst the most probable, and the
detachment should be thoroughly trained to recognize them and to apply
such remedy as lies in their power pending a permanent repair:—
(i) =Broken Cover Springs.=
The extractor may not drop when the lock is drawn back, and the gun will
stop with the crank handle in the first position. This may possibly be
overcome by liberal oiling of the lock, but in any case single shots can
be fired by holding the crank handle forward until the extractor drops
by its own weight.
(ii) =Broken Ejector Tube Spring=,
Causing either a block in the ejector tube or an accumulation of empty
cases in the breech casing. It may be found possible to keep the gun in
action if care is taken to prevent the latter.
(iii) =Cotter working out=,
Thus causing the screwed head and connecting rod to become separated. To
remedy proceed as follows:—
(_a_) Take out the cotter. (This will be found either on the crank or
at the bottom of the breech casing.)
(_b_) Press down the screwed head with a large screwdriver to lock
the cock.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account