Machine gun manual : $b a complete manual to machine gunnery, containing details of Maxim, Vickers, Lewis, Colt, Hotchkiss, together with drill (elementary and advanced) fire orders, notes from the front and a mass of other useful information — John Shaqi
Machine gun manual : $b a complete manual to machine gunnery, containing details of Maxim, Vickers, Lewis, Colt, Hotchkiss, together with drill (elementary and advanced) fire orders, notes from the front and a mass of other useful informationDouglas, H. (Composer)
History
Machine gun manual : $b a complete manual to machine gunnery, containing details of Maxim, Vickers, Lewis, Colt, Hotchkiss, together with drill (elementary and advanced) fire orders, notes from the front and a mass of other useful information
Douglas, H. (Composer)
Machine gun drill and tactics; Machine guns
(_a_) Remove top fixing screw of graduated plate. (_b_) Run the slide
off stem. (_c_) Remove fixing screw of milled head and lift latter off
slide. (_d_) Remove fixing pin, pawl, and pinion from slide. (_e_) Place
the milled head, face upwards, on a bench; then, with small screwdriver
applied to rectangular nib on slide spring, knock latter down flush with
face, when it can be lifted out with pliers.
EXAMINATION AND TESTING.
Before assembling the gun all parts should be tried in their places
separately to see that they work freely.
Test friction of recoiling portions (as Maxim, page 22).
Assembling.
Reverse all foregoing operations with exception that recoiling portions
must be replaced before packing and packing gland. When assembling lock,
care must be taken that lock spring is replaced with lock in fired
position, and when all the other parts are assembled. When assembling
rear crosspiece see that pawl of firing lever engages with trigger bar
lever. When assembling tangent sight, it will be found convenient to
place slide on stem (axis end) before attaching the milled head; in this
position pinion is prevented from turning with pawl when engaging arms
of spring outside lugs on pawl.
REPLACEMENT OF DEFECTIVE PARTS.
(As Maxim, page 22.)
STOPPAGES.
(As Maxim, page 24.)
DAMAGED PARTS OF LOCK, &c.
(As Maxim, page 29.)
POINTS TO BE ATTENDED TO.
────────┬────────────────────┬────────────────────┬────────────────────
│ Before firing. │ During firing. │ After firing.
────────┼────────────────────┼────────────────────┼────────────────────
Oil │Working and │Working parts during│Bore immediately.
│ recoiling │ temporary │
│ portions. │ cessation of fire.│
│In handles. │ │Thorough clean in
│ │ │ barracks.
────────┼────────────────────┼────────────────────┼────────────────────
Test │Recoiling portions. │ │Release lock spring.
│Fusee spring. │ │
────────┼────────────────────┼────────────────────┼────────────────────
Examine │Barrel. │Clamps of tripod not│Unload and clear
│ │ loose. │ extractor.
│Spare parts. │ │
│Belt. │Refill belts. │Empty cases (no live
│ │ │ rounds amongst
│ │ │ them).
────────┼────────────────────┼────────────────────┼────────────────────
Water │Fill barrel casing. │Watch consumption. │Empty out.
│Add glycerine in │ │
│ frosty weather. │ │
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account