How many tender voices have said this, with absolute joy? Arthur Brisbane said: “_A photograph can speak a million words!_” EVERY soldier should own a little camera. EVERY army-man can photograph, and the snapshot records may be PRICELESS in days to come. Our new List of Cameras at prices 25 per cent. to 50 per cent. below makers’ prices FREE, from the Firm with 40 years’ Reliable Reputation for honest photographic dealing. Send post card for Big List to-day. (Cameras taken in exchange or bought for CASH.) ✥ ✥ ✥ [Sidenote: 43 years’ service.] SANDS, HUNTER & CO., LTD. 37, Bedford St., Strand, W.C. _The Specialists in Photographic Apparatus._ The Maxim Gun. GENERAL DESCRIPTION. Weight of the ·303-in. gun, 60 lbs. Weight of the tripod, 48 lbs. Weight of ammunition box containing one filled belt, Mark VI 21 lbs., Mark VII 19½ lbs. The gun may be considered as divided into two portions—the non-recoiling and the recoiling. It is worked automatically by two forces—the explosion of the charge which forces the recoiling portion backwards, and a strong spring (called the fusee spring) which carries it forward. Non-Recoiling Portion. The non-recoiling portion consists of the barrel casing and breech casing, and is attached to the mounting by the crosshead and elevating joint pins. The barrel casing is of gunmetal, holding about seven pints of water to keep the barrel cool when firing; it has three openings, one on the upper right side near the breech for filling, one underneath near the muzzle for drawing off the water, and the third (also near the muzzle) for allowing the steam, but not the water, to escape. The first two are closed with screwed plugs; the last is open and connected with the steam tube, and carries the condenser nipple. A cork plug is provided which can be inserted in the steam escape hole when the gun is travelling, in order to prevent waste of water from jolting. The plug should always be taken out before commencing to fire, and put in again before the gun changes position, unless the condenser is attached to the barrel casing and can be conveniently moved with the gun. To prevent the escape of water, there is at the forward end of the barrel casing asbestos packing, which is held in position round the barrel by the packing gland. At the rear end of the barrel there is a cannelure, also filled with asbestos packing, which prevents the escape of water when the gun is working, and a gunmetal valve immediately in front of the barrel block, which prevents the escape of water when the gun is not firing and the barrel home.