Mechanics: The Science of MachineryBond, A. Russell (Alexander Russell)
History
Mechanics: The Science of Machinery
Bond, A. Russell (Alexander Russell)
Machinery; Mechanical engineering; Mechanics
The most remarkable clepsydræ were those invented by an old Alexandrian
mathematician, Ctesibius, who lived about 250 years before Christ.
Ctesibius introduced the siphon principle into his clocks, and also
employed gear wheels and even a cord and pulley. Furthermore, he was
the first man to employ jeweled bearings in a timepiece. The use of
jewels in timepieces was reinvented in 1704 A. D. However, Ctesibius
used his jewels in a very different way from that in which they are
used now, as will be described below.
[Illustration: FIG. 25.--THE JEWELED WATER CLOCK BUILT BY CTESIBIUS
ABOUT 250 B. C.]
Figure 25 illustrates the most interesting clock he built and it was
arranged to run year in and year out. The clock had a cylindrical face
mounted on a hollow pedestal in which the mechanism was concealed.
The column was divided off into twenty-four hours and a pointer that
rose vertically marked off the lapse of time. But here he was faced
with a serious complication. Hours in those days varied with the time
of the year. A day from sunrise to sunset consisted of twelve hours.
In summer, when the days were long, the hours were long, and in the
short days of winter the hours were correspondingly shortened. To be
sure, the variations in the length of the day are not so great in Egypt
as they are in our latitude, because it is nearer to the equator;
nevertheless there is a difference which the precise old mathematician
had to take into account. In order to provide for variations in the
hours, Ctesibius ran the lines spirally around the column and arranged
his cylindrical clockface to turn slightly each day, so that in the
winter months the clock hand or pointer moved over that part of the
face where the daylight hour lines were closer together and the hours
of night were farther apart, while in summer, the reverse would obtain.
At the bottom of the column were two little cherubs. The cherub on the
left was a sad little fellow who was constantly weeping. Tears trickled
from his eyes and dropped into a basin. The tears passed into the
hollow pedestal of the clock and gradually filled a cylinder formed in
the base of the clock. A piston in this cylinder supported the other
cherub. As the water gradually filled the cylinder this cherub was
slowly raised and a wand he held in his hand pointed off the hours on
the clockface. When the twenty-fourth hour was reached, a siphon came
into play, which suddenly emptied the cylinder, permitting the pointer
to drop. The siphon discharged its water into a small water wheel,
which, by means of the system of gears, turned the column slightly
to bring the hour lines in proper positions for measuring the time
intervals of the next day. The column made one complete turn in 365
days. The jeweled bearings, referred to above, were placed in the eyes
of the weeping boy, so that the holes that pierced them would not be
enlarged by the constant wear of the water and thereby increase the
rate of flow.
TIMING ANCIENT ORATORS
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account