Mechanics: The Science of MachineryBond, A. Russell (Alexander Russell)
History
Mechanics: The Science of Machinery
Bond, A. Russell (Alexander Russell)
Machinery; Mechanical engineering; Mechanics
A cubic foot of water weighs 62½ pounds. Take a hollow column with an
internal cross-sectional area of one square foot and if it be filled
with water to a depth of ten feet there will be a weight of 625 pounds
of water in the column and hence a pressure of 625 on the bottom of
the tube or 4.34 pounds on every square inch of the bottom. But the
water presses on the sides of the tube as well and the amount of
this pressure depends upon the depth or “head” of water and not upon
the quantity of water. At the bottom of the tube the pressure on the
side walls is 625 pounds per square foot or 4.34 pounds per square
inch; at a depth of one foot the pressure on the side walls is 62.5
pounds per square foot or .434 pound per square inch; at a depth of
two feet it will be .864 pound per square inch, etc. The pressure on
each square inch depends not upon the mass of the water but upon its
depth. If the column of water had a cross-sectional area of a mile or
a thousand miles, the pressure at a depth of one foot would always be
.434 pound per square inch. (Of course there are slight variations from
this figure due to salt or other substances dissolved in water or to
changes in density produced by variations of temperature, but we need
not consider such minute differences here.) That is why a dam which is
strong enough to hold back the waters of a pond will be just as able to
hold back the waters of the whole ocean if it be placed in a sheltered
bay where ocean waves cannot tear it to pieces. The ocean, despite its
enormous mass, can exert no more pressure per foot of depth than the
water in a cistern.
WHY A SHIP FLOATS
It is because the pressure of water at a given depth is exerted upward,
as well as laterally and downward, that a ship floats. It is the
upward pressure of the water that holds up the boat. When an object
is placed in a reservoir of water it sinks into zones of increasing
pressure until it finally reaches a depth at which the pressure on
the bottom of the object balances the weight of the body. If the body
is entirely submerged before reaching such a point, it will continue
to sink to the bottom of the reservoir because water will flow over
the top of the object and keep adding downward pressure to offset the
increasing upward pressure. The amount of water in the reservoir makes
no difference. A battleship will float just as high in a flooded dry
dock as it will in the open ocean. If the dry dock were so narrow as
to leave a clearance of but a few inches of water around the ship, the
latter would still float even though the ship weighed considerably more
than the water in the dock.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account