As for _Telescopes_, the only improvement they seem capable of, is the increasing of their length; for the Object being remote, there is no thought of giving it a greater light then it has; and therefore to augment the Aperture, the Glass must be ground of a very large sphere; for, by that means, the longer the Glass be, the bigger aperture will it bear, if the Glasses be of an equal goodness in their kind. Therefore a six will indure a much larger Aperture then a three foot Glass, and a sixty foot Glass will proportionably bear a greater Aperture then a thirty, and will as much excel it also as a six foot does a three foot, as I have experimentally observ’d in one of that length made by Mr. _Richard Reives_ here at _London_, which will bear an Aperture above three inches over, and yet make the Object proportionably big and distinct; whereas there are very few thirty foot Glasses that will indure an Aperture of more then two inches over. So that for _Telescopes_, supposing we had a very ready way of making their Object Glasses of exactly spherical Surfaces, we might, by increasing the length of the Glass, magnifie the Object to any assignable bigness. And for performing both these, I cannot imagine any way more easie, and more exact, then by this following Engine, by means of which, any Glasses, of what length soever, may be speedily made. It seems the most easie, because with one and the same Tool may be with care ground an Object Glass, of any length or breadth requisite, and that with very little or no trouble in fitting the Engine, and without much skill in the Grinder. It seems to be the most exact, for to the very last stroke the Glass does regulate and rectifie the Tool to its exact Figure; and the longer or more the Tool and Glass are wrought together, the more exact will both of them be of the desir’d Figure. Further, the motions of the Glass and Tool do so cross each other, that there is not one point of eithers Surface, but has thousands of cross motions thwarting it, so that there can be no kind of Rings or Gutters made either in the Tool or Glass.