Micrographia: Some Physiological Descriptions of Minute Bodies Made by Magnifying Glasses with Observations and Inquiries Thereupon — John Shaqi
Micrographia: Some Physiological Descriptions of Minute Bodies Made by Magnifying Glasses with Observations and Inquiries ThereuponHooke, Robert
History
Micrographia: Some Physiological Descriptions of Minute Bodies Made by Magnifying Glasses with Observations and Inquiries Thereupon
Hooke, Robert
Magnifying glasses -- Early works to 1800; Microscopy -- Early works to 1800; Natural history -- Pre-Linnean works
The Instrument consisted of five Rulers, or long pieces placed
together, after the manner exprest in the second Figure of the first
_Scheme_, where AB denotes a straight piece of wood about six foot and
two inches long, about three inches over, and an inch and half thick,
on the back side of which was hung a small plummet by a line stretcht
from top to bottom, by which this piece was set exactly upright, and so
very firmly fixt; in the middle of this was made a hole or center, into
which one end of a hollow cylindrical brass Box CC, fashion’d as I
shall by and by describe, was plac’d, and could very easily and truly
be mov’d to and fro; the other end of this Box being put into, and
moving in, a hole made in a small arm DD; into this box was fastned the
long Ruler EF, about three foot and three or four inches long, and at
three foot from the above mention’d Centers PP was a hole E, cut
through, and cross’d with two small threads, and at the end of it was
fixt a small sight G, and on the back side of it was fixt a small Arm
H, with a Screw to fix it in any place on the Ruler LM; this Ruler LM
was mov’d on the Center B (which was exactly three foot distance from
the middle Center P) and a line drawn through the middle of it LM, was
divided by a Line of cords into some sixty degrees, and each degree was
subdivided into minutes, so that putting the cross of the threads in E
upon any part of this divided line, I presently knew what Angle the two
Rules AB and EF made with each other, and by turning the Screw in H, I
could fix them in any position. The other Ruler also RS was made much
after the same manner, only it was not fixt to the hollow cylindrical
Box, but, by means of two small brass Armes or Ears, it mov’d on the
Centers of it; this also, by means of the cross threads in the hole S,
and by a Screw in K, could be fastned on any division of another line
of cords of the same radius drawn on NO. And so by that means, the
Angle made by the two Rulers, AB and RS, was also known. The Brass box
CC in the middle was shap’d very much like the Figure X, that is, it
was a cylindrical Box stopp’d close at either end, off of which a part
both of the sides and bottomes was cut out, so that the Box, when the
Pipe and that was joyned to it, would contain the Water when fill’d
half full, and would likewise, without running over, indure to be
inclin’d to an Angle, equal to that of the greatest refraction of
Water, and no more, without running over. The Ruler EF was fixt very
fast to the Pipe V, so that the Pipe V directed the length of the Ruler
EF, and the Box and Ruler were mov’d on the Pin TT, so as to make any
desirable Angle with the Ruler AB. The bottom of this Pipe V was stop’d
with a small piece of exactly plain Glass, which was plac’d exactly
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account