The yard is divided in two by a building 250 feet long by 50 feet wide, placed at right angles to the river, and which contains plate furnaces, bolt-maker’s shop, plumber’s shop, rivet store, tool stores, large bending rolls, straightening machine, and man-hole punch, on the ground floor; and on the upper storey rigging loft, sail loft, pattern stores, &c. Along the head of the building berths in one half of the yard there is a line of machine shops 400 feet long by 70 feet wide, in one end of which are installed frame furnaces, bending blocks, &c., as also a number of powerful punching machines, planing machines, special machines for angle cutting, and there has recently been added a powerful radial drill, having four moveable arms arranged to drill holes in any part of plate 16 feet by 4 feet without moving it. At the back of this machine shop, and parallel with it, is a smith’s shop 180 feet long by 50 feet wide, fitted up complete with steam hammers, &c. For the other half of the yard there is a large building 200 feet long, and of an average width of about 150 feet, which contains furnace, with bending blocks, &c., several heavy punching machines, planing machines, drilling and other machines; one portion about 80 feet by 60 feet being used as a fitting shop, containing powerful lathes, radial, and other drilling machines on the ground floor, and on the upper floor a lighter class of shaping, drilling, and other machines. In this building are also constructed two drying stoves, wherein the exhaust steam from the engine is used for drying timber. At the upper end of this machine shop is another blacksmiths’ shop 130 feet long by 50 feet wide, containing steam hammer and drilling machines for special work. A separate building, 80 feet long by 50 feet, is used for the bending and welding of beams, and is so placed that the beams can be lifted direct from barges alongside quay, and laid in position, ready for use. The smiths’, fitters’, and other similar shops are all conveniently situated; and as the vessels lie alongside the quay to be finished off after launching, the minimum of expense in this respect is incurred. There are numerous steam cranes of 10 tons and under on the quays for landing such portion of the material as comes by water, and also to lift articles on board the vessels fitting out.