The traps used were cylinders of galvanized wire, "hardware cloth" (Fitch, 1951:77; 1960:77), having funnels opening into each end, or having a funnel at one end and a plug at the other. The traps, open at both ends, were used along hilltop rock ledges where an exposed vertical rock face provided a barrier along which a snake might travel and where it could be easily intercepted by the trap without any accessory equipment (see Pl. 21, Fig. 1). Where such natural barriers were lacking, as in level fields, barriers consisting of boards, screens or sheet metal were installed to guide the racer toward the trap and into a funnel entrance. Two such barriers at each end of a trap forming a V to guide the snake into the funnel were used in 1956 and 1957, when trapping at places away from the hibernation ledges was undertaken. Later it was found simpler and more effective to use a single barrier with a trap at each end. The barrier extended up into the funnel entrance, and usually the racer, following along the barrier on either side, would pass into the funnel and through its apex. However, it was possible for a racer to travel around the end of the barrier without entering the trap, and perhaps some did so. The need for making the barrier and trap a tight unit impassable to the snake, was somewhat counterbalanced by the need for having the whole installation loosely constructed so that it could be easily altered, opened, adjusted, and cleaned. Since the traps were kept set in large numbers, and the task of checking them was time-consuming, speed of operation was more important than the perfect functioning of any one trap. Approximately 200 traps were kept set when operations were at their maximum. No record was kept of the number of "trap days" involved in the study, but the total was well over 100,000 for the Reservation and the Rockefeller Tract. When traps were set at both ends of a barrier, the outer end of each trap was closed with a plug. No bait was used in the traps. Occasionally small vertebrates and insects of kinds used as food by the racers may have gotten caught first and served to attract the snakes. Best catches of racers were made in the breeding season, since males were attracted by females already in the traps, and several males might be captured simultaneously with one female. Occasionally as a person approached or handled a trap, a racer darted out of it, displaying a perception, acuity of vision, and skill in avoiding the inward projecting wire prongs encircling the small funnel opening, that were exceptional among the several species of snakes trapped. Doubtless many other racers that were caught in traps escaped before they were discovered. If the funnel entrance of the trap was of the same diameter as the snake itself, or only a little larger, there was little likelihood of the trapped racer escaping. However, funnel openings were usually adjusted at a diameter of approximately 1-1/4 inches, allowing an