#Projection.# On only a few charts is there a statement of the projection used. Practically all general sailing charts are on the mercator projection, which can be readily recognized by the rectangular network of meridians and parallels and the increase with latitude of the distance between the parallels. On large scale local and harbor charts the kind of projection used is not of importance to navigation, as for such limited areas the difference between projections would not affect the use of the chart. On certain small scale charts of the United States Coast Survey which are on the polyconic projection this fact is stated on the chart, and can also be readily recognized by the convergence of the meridians and curvature of the parallels. Gnomonic charts intended for taking off great circle courses are always described in their titles and are also easily recognized by the increased scale and distortion toward all the borders. Charts of the polar regions are published on several different projections, which are distinguished from the mercator by their circular or curved parallels. #Geographic position.# For large scale and harbor charts the latitude and longitude of some point marked on the chart are sometimes stated on the face of the chart. For others of these, however, and for smaller scale and general charts, positions are obtained by reference to the border scale. There is a latitude scale down either side of the chart, and a longitude scale across the top and bottom. These scales are conveniently subdivided into degrees, minutes, or fractions of a minute. The minute is divided into tenths (6´´), sixths (10´´), quarters (15´´), or halves (30´´) on various charts.