Our First Half-Century: A Review of Queensland Progress Based Upon Official InformationQueensland
History
Our First Half-Century: A Review of Queensland Progress Based Upon Official Information
Queensland
Queensland -- History
Although the Hydraulic Engineer, so long before as December, 1884, had
recommended the Minister to import American boring machinery with men
trained to work it, it was not until 19th October, 1886, nearly two
years later, that he was able to announce that his advice had been
so far followed that Mr. Arnold, an American borer from Honolulu,
had gone to Blackall with a Pennsylvania Walking Beam Oil Rig boring
machine which had been constructed in Brisbane. It seems that so long
previously as July, 1885, two tenders for boring by Americans--one
being from Mr. Arnold--were submitted by the Hydraulic Engineer to
the Minister, with the intimation that they were both too vague for
acceptance, and expressing the hope that Mr. Arnold, "who seemed a man
of considerable experience, would submit a more liberal and definite
offer." The same report mentions that on the 30th June previously the
Blackall bore had been carried to a depth of 775 ft., and that at 127
ft. good water had been struck that rose to a height of 60 ft. below
the surface, but was deemed insufficient for the requirements of the
town. Up to that time nine bores had been completed, chiefly by the
ineffective Tiffin auger, but not one had reached artesian water, the
deepest being that at Blackall, and the average depth 371 ft.
ARTESIAN WATER STRUCK AT THURULGOONA.
In his report of 12th November, 1887, the Hydraulic Engineer states
that it is essential that only the best quality of tubing, or
"casing," should be used in bores. In April he had visited, by
direction of the Treasurer, Thurulgoona Station, on the New South
Wales border, and there carefully inspected boring operations. He
found that one bore had, by means of the Canadian Pole Tool boring
machine, been sunk to 1,079 ft., a supply of excellent water having
been struck at a depth of 1,009 ft., "the water overflowing in my
presence to a height of about 20 in. above the surface of the ground."
This was apparently the first artesian water Mr. Henderson had seen in
Queensland, though he had years previously seen the artesian well at
Sale, in Victoria; and he naturally pronounced the opinion that the
result at Thurulgoona was "very satisfactory." During this year
boring had been carried on in Queensland without success so far as the
formation of flowing wells was concerned. Mr. Arnold, having sunk
to 1,039 ft. at Blackall, resigned, but it was decided to continue
sinking, all the tubing being recovered with the exception of a few
feet, and being capable of use several times over if need be. During
this year also tenders had been received from Mr. Loughead, of
Thurulgoona, to put down three bores of 2,500 ft. in Queensland, and
Mr. Henderson reported that there was every prospect of a tender being
received from a company recently formed in Brisbane at a slightly
lower price than Mr. Loughead had named.
GOVERNMENT'S FIRST FLOWING WELL.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account