The drying of the clay used in painting can, however, be retarded by the use of gum tragacanth, which may be mixed with it. It would, perhaps, be better always to take the precaution to use this medium, although when, as remarked before, the body of the ware is still quite soft, and the condition of the atmosphere such as to prevent too rapid drying, the painting may be executed simply with the use of water. Just here a caution as to the use of gum tragacanth may be given, and that is, that it is better not to mix the gum with more of the colored clay prepared for painting than is to be used at once. When mixed only with water, the clay after becoming dry, can be easily rubbed down again with water; but if gum tragacanth has been used in the mixture, and it has been allowed to dry upon the palette, the gum will not re-dissolve readily under the action of water and the palette knife, and the mixture will be full of small particles of undissolved gum, which will render it unpleasant to work with. To prepare gum tragacanth for use, it is dissolved in water, to which may be added a drop of salicylic acid to keep it from turning sour. The clay, which is to form a body for the colors, must be dissolved in water until of a proper consistency for painting. It should be a little thicker than the diluted clay used by potters and technically called “slip.” As to the quality of the clay, the desideratum is that it shall be colorless and not inclined to crack in drying. The clay used in the manufacture of white granite ware is probably the best clay for this purpose, generally accessible. This can be mixed with all the colors without injury to the tint of any. Parian clay produces the most beautiful effects, and, where it is possible to procure it, forms the best medium for this painting. More care must, however, be exercised in its use, as it is very liable to crack in drying, and from the translucency produced in the body by the action of the fire, must be laid on more thickly than clays which have greater opacity, to produce the effect desired. In the case of yellow, which does not always stand the fire well, it is best to mix the color with a yellow-tinted clay to ensure a successful result. C. C. clay, which is a cream-tinted white, will effect this. If a darker yellow is desired, clay which in firing acquires a decided yellow-tint may be used. A light cream-tinted clay, such as C. C., or “stilt” clay, may be used with yellows therefore, with advantage, with browns and blues without disagreeable effects; but in the case of scarlet, pink, or crimson and greens, nothing but white clay must be used, if purity of tint is desired. The reason for this is that the presence of iron in the yellow-tinted clays injures the colors mentioned.