The phenomenon called combustion by which we obtain the heat energy necessary for the operation of the internal combustion engine is a chemical combination of the air with the fuel. This process results in heat and some light which is equal in quantity to the energy required to separate the fuel compound into its elements or to build it up in its present form from the original elements. If the process is comparatively slow, the compound is called a fuel, if it is instantaneous it is called an explosive. Some substances produce mechanical force through an instant, without the evolution of much heat, due to the disintegration of an unstable compound. The effect of the latter type of which dynamite is an example is static, that is to say, it is not capable of producing power, but only pressure. For this reason, compounds having an instantaneous effect without the ability to produce the pressure through a distance, or an expansion, are not considered as suitable fuels for a heat engine. A fuel is essentially a substance which is capable of generating heat, which is a form of energy, and not static pressure. The heat engine is an instrument which transforms this energy into power which is again dissipated into heat through the friction of the engine itself and by the load that it drives. This is an illustration of the physical law that “energy can neither be created nor destroyed,” that is, the heat energy developed by the fuel is converted into mechanical energy which is again transformed into heat energy through friction. It should be understood that fuel belongs to that class of substances that will not burn nor evolve energy under any temperature, pressure, or shock, without an outside supply of oxygen. This is the characteristic property of all fuels used with the internal combustion engine. Each element, such as carbon and hydrogen, in a compound fuel, develops a certain definite amount of heat during their complete combustion, and at the close of the process certain compounds are formed that represent the lowest chemical form of the compound. To restore the products of combustion to their original form as fuel would require an expenditure of energy equal to that given out in the combustion. While all substances that are capable of oxydization or combustion can be made to liberate heat energy, it does not follow that all of them can be successfully used as fuels. A fuel suitable for the production of power must be cheap, accessible and of small bulk, and must burn rapidly. Such fuels must also be products of nature that require no expenditure of energy in their preparation or completion. [Illustration: Fig. F-4. Fairbanks-Morse Producer Plant and Engine, Connected for Operation. ]