_Estimation of Magnesium Chlorid._—In order to estimate the amount of magnesium chlorid in high grade muriate of potash, twenty-five grams of the latter salt are dissolved in a half liter flask and treated with ten cubic centimeters of a normal solution of potash lye. The flask is then filled to the mark with water, thoroughly shaken and its contents filtered. Fifty cubic centimeters of the filtrate are then titrated with one-tenth normal sulfuric acid. The calcium compounds which remain in solution do not influence the result. The quantity of magnesium chlorid originally present corresponds to the number of cubic centimeters of the normal potash lye which has disappeared in the operation. The reaction which takes place is represented by the following equation: MgCl₂ + 2KOH = MgO₂H₂ + 2KCl. _Potassium Sulfate._—The quantity of potassium sulfate contained in the high grade sulfates of commerce is determined in the following manner: In a half liter flask are placed 8.9235 grams of the finely ground sample which is dissolved in about 350 cubic centimeters of boiling water after the addition of twenty cubic centimeters of hydrochloric acid. The sulfuric acid is thrown out by the addition, drop by drop, of a barium chlorid solution, the contents of the flask being kept boiling meanwhile and thoroughly stirred. From time to time the addition of the barium chlorid is stopped and the upper part of the liquid allowed to become clear by the subsidence of the barium sulfate. It is then noticed whether or not an additional drop of the barium chlorid solution produces a turbidity. Any excess of barium chlorid is removed by the careful addition of sulfuric acid. After the precipitation is complete and the contents of the flask are cooled, it is filled up to the mark with water and its contents filtered. Twenty cubic centimeters of the filtrate, corresponding to 0.357 gram of the original salt are precipitated by platinic chlorid in the usual manner and the resulting potassium platinochlorid collected and weighed. One milligram of the potassium platinochlorid thus obtained corresponds to one-tenth per cent of potassium sulfate in the original salt. To the percentage of potassium sulfate thus found three-tenths per cent are to be added for a correction when high grade potassium sulfate is taken. If the sample be a high grade sulfate of potassium and magnesium no correction should be applied.