=Metals used for Thermal Junctions.=—Until recent years it was customary to employ a platinum-rhodioplatinum or platinum-iridioplatinum junction for all temperatures beyond the scope of the mercury thermometer. The almost prohibitive price of these metals has caused investigations to be made with a view to discovering cheaper substitutes, with successful results up to 1000° C. or 1800° F., thus comprehending the range of temperatures employed in many industrial processes. Above this temperature the platinum series of metals are still used for accurate working, but it will be of great advantage if the range measurable by cheap or “base” metals can be further extended. Promise in this direction is afforded by the properties of fused metals when used in thermal junctions. An investigation by the author has shown that in general the E.M.F. developed by a junction does not undergo any sudden change when one or both metals melt, but continues as if fusion had not occurred. By making arrangements to maintain the continuity of the circuit after fusion, it may be possible to read temperatures approximating to the boiling points of metals such as copper and tin, both of which are over 2000° C. The base metals are not so durable as platinum and kindred metals, but as the cost of replacement is negligible, this drawback is of little importance. Moreover, base-metal junctions usually develop a much higher E.M.F. than the platinum metals, which enables stronger and cheaper galvanometers to be used as indicators.