River and Canal Engineering, the characteristics of open flowing streams, and the principles and methods to be followed in dealing with them.Bellasis, E. S. (Edward Skelton)
Science
River and Canal Engineering, the characteristics of open flowing streams, and the principles and methods to be followed in dealing with them.
Bellasis, E. S. (Edward Skelton)
Canals; Hydraulic engineering; Rivers
8. =Remarks.=--Very much remains to be done in collecting and
publishing information concerning the ratio of the discharges to the
rainfall. By observing a fall of rain and the discharge of a stream
before and after the fall, it is possible to ascertain the figures
for that occasion, but they will not hold good for all occasions.
Continuous observations are required. The chief obstacle is the
expense. Not only have measuring weirs and apparatus for automatically
recording the water-level to be provided, but the weirs would often
cause flooding of land involving payment of compensation. The most
suitable places for making observations are those where reservoirs for
water-works exist or are about to be made.
CHAPTER IV
THE SILTING AND SCOURING ACTION OF STREAMS
1. =Preliminary Remarks.=--When flowing water carries solid substances
in suspension, they are known as “silt.” Material is also moved by
being rolled along the bed of the stream. The difference between silt
and rolled material is one of degree and not of kind. Material of
one kind may be rolled and carried alternately. The quantity of silt
present in each cubic foot of water is called the “charge” of silt.
Silt consists chiefly of mud and fine sand; rolled material of sand,
gravel, shingle, and boulders. When a stream erodes its channel, it is
said to “scour.” When it deposits material in its channel, it is said
to “silt.” Both terms are used irrespective of whether the material is
silt or rolled material. A stream of given velocity and depth can carry
only a certain charge of silt. When it is carrying this it is said to
be “fully charged.”
If a stream has power to scour any particular material from its
channel, it has power to transport it; but the converse is not true.
If the material is hard or coherent, the stream may have far more
difficulty in eroding it than in merely keeping it moving. And there is
generally a little more difficulty even when the material is soft.
Silting or scour may affect the bed of a channel or the sides or both.
The channel may thus decrease or increase in width or--if one bank is
affected more than, or in a different manner to, the other--alter its
position laterally whether or not it is altering its bed level, and
_vice versa_.
The cross-section of a stream is generally “shallow,” _i.e._ the width
of the bed is greater than the combined submerged lengths of the sides,
and the action on the bed is generally greater than on the sides.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account