River and Canal Engineering, the characteristics of open flowing streams, and the principles and methods to be followed in dealing with them.Bellasis, E. S. (Edward Skelton)
Science
River and Canal Engineering, the characteristics of open flowing streams, and the principles and methods to be followed in dealing with them.
Bellasis, E. S. (Edward Skelton)
Canals; Hydraulic engineering; Rivers
Let a stream of pure water having a depth D, and with boulders on its
bed, have a velocity V just sufficient to move them very slowly. Any
larger boulders would not be moved. Any smaller boulders would move
more quickly. Similarly, fine sand would be rolled more quickly than
coarse sand. If the velocity of the stream increases, larger boulders
would be moved. Streams are thus constantly sorting out the materials
which they roll. If the bed is examined it will be found that large
boulders exist only down to a certain point, smaller boulders, shingle,
gravel, coarse sand and fine sand following in succession.
If the water, instead of being pure, is supposed to contain silt, this
may affect its velocity--it is not, however, known to do so--but, given
a certain velocity, it is not likely that the rolling power of the
stream is much affected by its containing silt.
It is sometimes supposed that increased depth gives increased rolling
power, because of the increased pressure, but this is not so. The
increased pressure due to depth acts on both the upstream and
downstream sides of a body. It is moved only by the pressure due to the
velocity.
When sand is rolled along the bed of a stream there is usually a
succession of abrupt falls in the bed. After each fall there is a long
gentle upward slope till the next fall is reached. The sand is rolled
up the long slope and falls over the steep one. It soon becomes buried.
The positions of the falls of course keep moving downstream. The height
of a fall in a large channel is perhaps 6 inches or 1 foot, and the
distance between the falls 20 or 30 feet. A fall does not usually
extend straight across the bed but zigzags.
It has sometimes been said that the inclination of the bed of a stream,
when high, facilitates scour, the material rolling more easily down a
steep inclined plane. The inclination is nearly always too small to
have any appreciable direct effect. The inclination of the surface of
the stream of course affects its velocity, and this is the chief factor
in the case.
A sudden rise in the bed of a stream does not necessarily cause rolled
materials to accumulate there, except perhaps to the extent necessary
to form a gentle slope. Frequently even this slope is not formed,
especially if the rolled material is only sand. The eddies stir it up
and it is carried on. The above remarks apply also to weirs or other
local rises in the bed.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account