Scientific American Supplement, No. 1178, June 25, 1898Various
History
Scientific American Supplement, No. 1178, June 25, 1898
Various
Science -- Periodicals
In the mechanical process of reclaiming rubber, the rubber is
separated from the fiber, after the whole has been finely ground, by
means of an air blast, the method being not unlike that practiced by
furriers for separating hair and fur from bits of pelt after skins
have been finely divided. As the powdered waste comes from the blower,
the rubber falls in a heap near the machine, while the particles of
fiber, being lighter, are carried far enough away to make the
separation complete. Devulcanization in this case is effected by
exposure to live steam at a high temperature. No oil is used in the
process, the sheeting of the product being facilitated by means of hot
friction rollers.
The cost of reclaiming rubber by the acid process is less than by
mechanical means, for which reason the former is now much more
generally used. But some manufacturers are willing to pay more per
pound for mechanically-reclaimed rubber, either (1) because it can be
"compounded" more heavily than the acid product, or (2) because of
certain inherent disadvantages of the latter. It is the testimony of
these manufacturers that the action of sulphuric acid upon whiting
(one of the most common adulterants used in rubber shoes) is to turn
it into sulphate of lime—an ingredient which is far from advantageous
in a rubber compound. Again, any acid which may remain in the
reclaimed rubber is liable to rot thin textile fabrics with which it
may be combined in manufacture. Finally, rubber recovered by the
chemical process, it is claimed, is harder than that obtained by any
other; so that it is usual to add, during vulcanization, in order to
soften the product, the residuum obtained from petroleum manufactures,
or palm or other oils. Unvulcanized rubber clippings also have been
used for this purpose. One of the most successful of our rubber
factory superintendents, who formerly made the reclaimed rubber used
by his factory, has stated that his practice was to subject the
material to an alkaline bath after the acid treatment, not only for
the better cleaning of the rubber, but to neutralize any acid which
might remain. Considering all the points involved, it was his opinion
that, when scrap rubber is cheap, the mechanical process is the more
economical, while, if it is high priced, the acid process has the
advantage. Since this expression of opinion, however, prices of rubber
scrap have ranged constantly at higher figures than before, and there
is no indication that we shall have again what was known formerly as
"cheap" scrap. It is not surprising, therefore, that the volume of
mechanical "shoddy" should be placed by the best estimates at not
above one-sixth of the total production of reclaimed rubber in the
United States. And the acid product, with all its admitted
shortcomings, is still superior to any of the so-called rubber
substitutes.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account