If my record had gone back to just before 1851 (the date of the great exhibition), I might have described much progress in the principles of girder construction; for shortly prior to that date, the plain cast-iron beam, with the greater part of the metal in the web, and with but little in the top and bottom flange, was in common use; and even in the preparation of the building for that exhibition, it is recorded that one of the engineers connected therewith had great difficulty in understanding how it was that the form of open work girder, with double diagonals introduced therein (a form which was for years afterward known as the exhibition girder), was any stronger than a girder with open panels separated by uprights, and without any diagonals. But, long before 1862, the Warren and other truss-girders had come into use, and I am inclined to say that, so far as novelty in the principle of girder-construction is concerned, I must confine myself to that combination of principles which is represented by the suspended cantilever, of which the Forth Bridge, only now in course of construction, affords the most notable instance. It is difficult to see how a rigid bridge, with 1,700 foot spans, and with the necessity for so much clear headway below, could have been constructed without the application of this principle. BRIDGE CONSTRUCTION. Pursuing this subject of bridge work, the St. Louis Bridge of Mr. Eads may, I think, be fairly said to embody a principle of construction novel since 1862, that of employing for the arch-ribs tubes composed of steel staves hooped together. Further, in suspension bridges there has been introduced that which I think is fairly entitled to rank among principles of construction, the light upper chain, from which are suspended the linked truss-rods, doing the actual work of supporting the load, the rods being maintained in straight lines, and without the flexure at the joints due to their weight. In the East River Bridge, New York, there was also introduced that which I believe was a novelty in the mode of applying the wire cables. These were not made as untwisted cables and then hoisted into place, thereby imposing severe strains upon many of the wires composing the cable through their flexure over the saddles and elsewhere, but the individual wires were led over from side to side, each one having the length appropriate to its position, and all, therefore, when the bridge was erected, having the same initial strain and the same fair play. Within the period we are considering, the employment of testing-machines has come into the daily practice of the engineer; by the use of these he is made experimentally acquainted with the various physical properties of the materials he employs, and is also enabled in the largest of these machines to test the strength and usefulness of these materials, when assembled into forms, to resist strains, as columns or as girders. I of course do not for one moment mean to say that