Scientific American Supplement, No. 623, December 10, 1887 — John Shaqi
Scientific American Supplement, No. 623, December 10, 1887Various
Science
Scientific American Supplement, No. 623, December 10, 1887
Various
Science -- Periodicals
The petroleum might evidently be made to enter at A and the steam at
B; but one of the conclusions of the experiments cited is that the
performance is better when the jet of steam surrounds the petroleum.
It will be understood, in fact, that by this means not a particle of
the liquid can escape vaporization and, consequently, combustion.
Moreover, as the jet of petroleum is completely surrounded by steam
its flow can be increased within the widest limits, and this, in
certain cases, may prevent an obstruction without much diminishing the
useful effect of the burner.
The apparatus is easily and rapidly taken apart. It it is only
necessary to remove the nozzle, C, in order to partially clean it. It
would even seem that the cleaning might be done automatically by
occasionally reversing the flow of the steam and petroleum. However
efficacious such a method might prove, the apparatus as we have
described it can be very easily applied to any generator. Fig. 2
represents it as applied to the front of a furnace provided with two
doors. A metallic box, with two compartments, is placed on one side of
the furnace, and is provided with two stuffing boxes that are capable
of revolving around the steam and petroleum pipes. The latter thus
form the pivots of the hinge that allows of the play of the vaporizers
and piping.
[Illustration: FIG. 2--THE BURNER APPLIED TO THE FURNACE OF A BOILER.]
It was in this way that Mr. Dietrich arranged his apparatus in an
experiment made upon a stationary boiler belonging to a Mr. Corpet.
The experiment was satisfactory and led to the adoption of the
arrangement shown in Fig. 3. The fire bridge is constructed of
refractory bricks, and the majority of the grate bars are filled in
with brick. The few free bars permit of the firing of the boiler and
of access of air to the interior of the fire box. Under such
circumstances, the combustion is very regular, the furnace does not
roar, and the smoke-consuming qualities are perfect.
[Illustration: FIG. 3--APPLICATION OF THE BURNER TO A RETURN FLAME
BOILER.]
In the experiment on the Flamboyante, the boiler was provided with but
one apparatus, and the grate remained covered with a layer of ignited
coal that had been used for firing up in order to obtain the necessary
pressure of steam to set the vaporizer in operation. This ignited coal
appeared to very advantageously replace the refractory bricks, the
role of which it exactly fulfilled. It has been found well, moreover,
to break the flames by a few piles of bricks in the furnace, in order
to obtain as intimate a mixture as possible of the inflammable gases.
It is to be remarked that firing up in order to obtain the necessary
steam at first is a drawback that might be surmounted by using at the
beginning of the operation a very small auxiliary boiler. The main
furnace would then be fired by means of say a wad of cotton. But, in
current practice, if a grate and fire be retained, the firing will
perhaps be simpler.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account