In respect to the second form of Holtz machine (Fig. 4) I have very little information, for since it was brought to my notice nearly six years ago I have not been able to find either one of the machines or any person who had seen one. As will be seen by the diagram, it has two disks revolving in opposite directions, it has no metal sectors and no metal contacts. The "connecting arc circuit" is used for the terminal circuit. Altogether I can very well understand and fully appreciate the statement made by Professor Holtz in _Uppenborn's Journal_ of May, 1881, wherein he writes that "for the purpose of demonstration I would rather be without such machines." The first type of Holtz machine has now in many instances been made up in multiple form, within suitably constructed glass cases, but when so made up, great difficulty has been found in keeping each of the many plates to a like excitement. When differently excited, the one set of plates furnished positive electricity to the comb, while the next set of plates gave negative electricity; as a consequence, no electricity passed the terminal. To overcome this objection, to dispense with the dangerously cut plates, and also to better neutralize the revolving plate, throughout its whole diameter, I made a large machine having twelve disks 2 ft. 7 in. in diameter, and in it I inserted plain rectangular slips of glass between the disks, which might readily be removed; these slips carried the paper inductors. To keep all the paper inductors on one side of the machine to a like excitement, I connected them together by a metal wire. The machine so made worked splendidly, and your late president, Mr. Spottiswoode, sent on two occasions to take note of my successful modifications. The machine is now ten years old, but still works perfectly. I will show you a smaller sized one at work. The next machine for observations is the Carre (Fig. 8). It consists essentially or a disk of glass which is free to revolve without touch or friction. At one end of a diameter it moves near to the excited plate of a frictional machine, while at the opposite end of the diameter is a strip of insulting material, opposite which, and also opposite the excited amalgam plate, are combs for conducting the induced charges, and to which the terminals are metallically connected; the machine works well in ordinary atmosphere, and certainly is in many ways to be preferred to the simple frictional machine. In my experiments with it I found that the quantity of electricity might be more than doubled by adding a segment of glass between the amalgam cushions and the revolving plate. The current in this type of machine is constant.