Scientific American Supplement, No. 717, September 28, 1889Various
Science
Scientific American Supplement, No. 717, September 28, 1889
Various
Science -- Periodicals
It is therefore evident how great is the advantage of reducing the
size of a torsion wire. Even if it is only halved, the torsion is
reduced sixteenfold. To give a better idea of the actual sizes of such
wires and fibers as are in use, I shall show upon the screen a series
of such photographs taken by Mr. Chapman, on each of which a scale of
thousandths of an inch has been printed.
[Illustration: Scale of 1000ths of an inch for Figs. 1 to 7. The scale
of Figs. 8 and 9 is much finer.]
[Illustration: FIG. 1.]
[Illustration: FIG. 2.]
[Illustration: FIG. 3.]
The first photograph (Fig. 1) is an ordinary hair--a sufficiently
familiar object, and one that is generally spoken of as if it were
rather fine. Much finer than this is the specimen of copper wire now
on the screen (Fig. 2), which I recently obtained from Messrs. Nalder
Brothers. It is only a little over one-thousandth of an inch in
diameter. Ordinary spun glass, a most beautiful material, is about
one-thousandth of an inch in diameter, and this would appear to be an
ideal torsion thread (Fig. 3). Owing to its fineness, its torsion
would be extremely small, and the more so because glass is more easily
deformed than metals. Owing to its very great strength, it can carry
heavier loads than would be expected of it. I imagine many physicists
must have turned to this material in their endeavor to find a really
delicate torsion thread. I have so turned only to be disappointed. It
has every good quality but one, and that is its imperfect elasticity.
For instance, a mirror hung by a piece of spun glass is casting an
image of a spot of light on the scale. If I turn the mirror, by means
of a fork, twice to the right, and then turn it back again, the light
does not come back to its old point of rest, but oscillates about a
point on one side, which, however, is slowly changing, so that it is
impossible to say what the point of rest really is. Further, if the
glass is twisted one way first and then the other way, the point of
rest moves in a manner which shows that it is not influenced by the
last deflection alone: the glass remembers what was done to it
previously. For this reason spun glass is quite unsuitable as a
torsion thread; it is impossible to say what the twist is at any time,
and therefore what is the force developed.
[Illustration: FIG. 4.]
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account