I claim, 1st, The application of each tooth, E, to its arm, D, by means of a round tenon arranged at an obtuse angle with the axis of the tooth, and going into the arm, the same being substantially as and for the purpose described. 2d, Also, the combination as well as the arrangement of the adjustable brace d, and the staple or clasping wire, f, with the arm and the tooth, when applid by means substantially as specified, viz., a cylindrical tenon arranged at an obtuse angle with the axis of the tooth, and going into a corresponding hole made in the arm. 3d, Also, the combination of the damping screw, h, with the arm, and the tooth applied to such arm by a tenon arranged at an obtuse angle with the axis of the tooth as specified. 4th, Also, the arrangement of the rope, or its equivalent, with the several arms and their teeth, and the braces thereof, the said rope being to operate as and for the purpose specified. 72,007.--PUNCH FOR FORMING CLASP.--Charles D. Flesche, New York city. I claim the sliding punch, B, in combination with the plates, A A', cutters, b b, an spring, e, substantially as and for the purpose herein shown and described. 72,008.--SELF-FASTENING SPRING FOR WEBBING.--John Flinn, Philadelphia, Pa., assignor to Archer Steel, same place. I claim a spiral spring, for webbing, having the wire at one end of the spiral coils, A A, bent in the manner described and shown by B C D E, for the purpose specified. 72,009.--CARVING KNIFE AND FORK HOLDER.--Alden T. Foster, Albany, N.Y. I claim, as an article of manufacture, the dish or stand, A, constructed substantially as described, with notches, a a and c c, as and for the purpose set forth. 72,010.--LAMP CHIMNEY.--Sam'l W. Fowler, Brooklyn, N.Y. I claim the construction of the glass chimney, with its concave and convex deflectors, J and E, on each side, and collar, B, beneath, with its projections, C C, as herein described and for the purposes set forth. 72,011.--CARTRIDGE BOX.--William Freeborn, Tivoli, N.Y. I claim the square box, A, made of leather or any suitable material, when constructed with a series of round, fluted, or ruffled holders, B, on the inside, made of any firm or flexible material, a series of holders, B, being attached to each flap, C, in front, and the flaps buttoning to the sides of the box, A, as herein described and for the purpose set forth. 72,012.--DEVICE FOR HITCHING HORSES.--Samuel Galbraith, New Orleans, La. I claim the device above described, consisting of the rings, A and B, and the pivoted curved jaws, C C, meeting at one extremity at e' e', and connected at the other by means of the rods, r r, and springs, s, working in the tube, substantially as and for the purpose specified. 72,013.--CAPPING SCREWS.--J. Gardner, New Haven, Conn.