Signalling across space without wires: being a description of the work of Hertz & his successorsLodge, Oliver, Sir
Science
Signalling across space without wires: being a description of the work of Hertz & his successors
Lodge, Oliver, Sir
Electric waves; Telegraph, Wireless
The lens helps us to set correctly an 18 in. circular copper disc in
position for showing the bright diffraction spot. Removing the disc,
the effect is much the same as when it was present, in accordance with
the theory of Poisson. Add the lens and the effect is greater. With a
diffraction grating of copper strips 2 in. broad and 2 in. apart, I
have not yet succeeded in getting good results. It is difficult to get
sharp nodes and interference effects with these sensitive detectors
in a room. I expect to do better when I can try out of doors, away
from so many reflecting surfaces; indoors it is like trying delicate
optical experiments in a small whitewashed chamber well supplied
with looking-glasses; nor have I ever succeeded in getting clear
concentration with this zone-plate having Newton’s rings fixed to it
in tinfoil. The coherer, at any rate in a room, does not seem well
adapted to interference experiments; it is probably too sensitive, and
responds even at the nodes, unless they are made more perfect than is
easily practicable. But really there is nothing of much interest now
in diffraction effects, except the demonstration of the waves and the
measure of their length. There was immense interest in Hertz’s time,
because then the wave character of the radiation had to be proved; but
every possible kind of wave must give interference and diffraction
effects, and their theory is, so to say, worked out. More interest
attaches to polarisation, double refraction, and dispersion experiments.
[Illustration: FIG. 22.--Zone-plate of Tinfoil on Glass. Every circular
strip is of area equal to central space.]
_Polarising and Analysing Grids._
Polarisation experiments are easy enough. Radiation from a sphere, or
cylinder, or dumb-bell is already strongly polarised, and the tube acts
as a partial analyser, responding much more vigorously when its length
is parallel to the line of sparks than when they are crossed; but a
convenient extra polariser is a grid of wires something like what was
used by Hertz, only on a much smaller scale; say an 18 in. octagonal
frame of copper strip with a harp of parallel copper wires (_see_ Fig.
21, on floor). The spark-line of the radiator (Fig. 20) being set at 45
deg., a vertical grid placed over the receiver reduces the reflection
to about one-half, and a crossed grid over the source reduces it to
nearly nothing.
Rotating either grid a little rapidly increases the effect, which
becomes a maximum when they are parallel. The interposition of a third
grid, with its wires at 45 deg., between two crossed grids, restores
some of the obliterated effect.
Radiation reflected from a grid is strongly polarised, of course, in a
plane normal to that of the radiation which gets through it. They are
thus analogous in their effect to Nicols, or to a pile of plates.
The electric vibrations which get through these grids are at right
angles to the wires. Vibrations parallel to the wires are reflected or
absorbed.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account