This being understood, let us at the beginning of the series of operations we wish to execute, place the needle on the division 2, the needle on the division 5, and the needle on the division 9. Let us allow the hammer of the dial to strike; it will strike twice, and at the same time the needle will pass over two divisions. The latter will then indicate the number 7, which succeeds the number 5 in the column of first differences. If we now permit the hammer of the dial to strike in its turn, it will strike seven times, during which the needle will advance seven divisions; these added to the nine already marked by it, will give the number 16, which is the square number consecutive to 9. If we now recommence these operations, beginning with the needle , which is always to be left on the division 2, we shall perceive that by repeating them indefinitely, we may successively reproduce the series of whole square numbers by means of a very simple mechanism. The theorem on which is based the construction of the machine we have just been describing, is a particular case of the following more general theorem: that if in any polynomial whatever, the highest power of whose variable is , this same variable be increased by equal degrees; the corresponding values of the polynomial then calculated, and the first, second, third, differences of these be taken (as for the preceding series of squares); the th differences will all be equal to each other. So that, in order to reproduce the series of values of the polynomial by means of a machine analogous to the one above described, it is sufficient that there be () dials, having the mutual relations we have indicated. As the differences may be either positive or negative, the machine will have a contrivance for either advancing or retrograding each needle, according as the number to be algebraically added may have the sign plus or minus.