When the smoke slowly oozes into the room, it is caused by sluggish draught, or often by the construction of the grate. If the grate has considerable distance between the fire-bars and the opening into the chimney above, it permits the heavy cold air to accumulate and obstruct the heated up-flow from the fire; this generally is only noticeable when the fire is first lighted or heavily fed. It is exactly the same result as is experienced with the old-fashioned open kitchen ranges, which nearly always require a sheet of metal or “blower” across the opening to prevent their smoking. The above-mentioned grates require a strong draught to work them perfectly; or if a strong draught does not exist, a small piece of sheet-metal should be provided to fit over the open space above the front bars when necessary to establish the fire, as explained with the “Eagle” grate. Sluggish draughts are from a variety of causes, among which might be named, insufficient height of chimney; chimneys which by any cause may become damp or cold, or lose their heat rapidly; leakages, holes or fissures, and a variety of causes too numerous to mention here. The interior surface of a chimney should be as smooth as possible, and should be swept at regular and moderately frequent intervals, otherwise the draught will be reduced. Every fireplace should have a distinct and separate flue; sometimes two fireplaces can be successfully worked into one chimney, but provision must be made for tightly closing off either one when not in use.