The determination of the weight and solidity-giving properties is important both for leathers tanned with vegetable tanning extracts and for those treated with synthetic tannins, but the results obtained when using animalised cotton are not directly convertible into figures required for practical purposes. Comparative figures are better obtained by actually tanning pieces of pelt on as practical a scale as is possible, and testing the weights and tensile strengths of the pieces as against those of the original pelts, whereby in the former case the yield (pelt --> leather) is obtained. Its capability as a tanning agent may be ascertained by submitting the synthetic tannin to an actual test tannage. The latter is carried out by introducing the dilute extract into open glass jars, holding about 400 c.c. at a width of about 8 cm. [Footnote: Accumulator jars are excellent for the purpose.--_Transl_.] The concentration of the solution is chosen according to acidity and salt contents of the synthetic tannin, the most suitable being 1.5°-2.5° Bé. A piece of bated pelt is suspended in the liquor in such a way that the pelt is completely surrounded by liquor, without, however, being creased or touching the bottom. If the pelt were creased during tannage, the wrinkles would become fixed and would show in the finished leather. Thus an unfair judgment of the extract would be delivered, since similar results are produced by liquors which are either too concentrated or are not properly composed, and naturally this property of an extract would be greatly to its disadvantage. The various stages of tannage may be judged from various standpoints when examining the pelt as tannage proceeds. On the one hand, the surface of the but slightly porous pelt is altered so as to present a more porous appearance, which is now rendered more capable of absorbing liquids. On the other hand, a similar alteration takes place _within_ the pelt, to the extent to which the tanning matter has penetrated it. How far the penetration has proceeded is easily determined by utilising the different adsorption of coal-tar dyes by untanned and tanned pelt (see p. 121). An indicator for those synthetic tannins, which are derived from the phenols, is ferric chloride, which only colours those parts of the pelt which have been penetrated by the synthetic tannins; clearer and better results are, however, obtained when the dyestuffs referred to above are employed.