The American Bee Journal, Vol. VI., Number 5, November 1870Various
Science
The American Bee Journal, Vol. VI., Number 5, November 1870
Various
Bee culture -- Periodicals
To do this properly and safely make the box or case in which you ship
only wide enough to receive the length of the top bar of your frames,
and one and a half inch deeper than the depth of the frame. Make the
case tight and pitch the inside with rosin and bees wax, so that the
leakage of the combs will not be lost.
In packing the frame honey, first pierce the projection of the frames
through with an awl, invert it and place in the holes one inch finishing
nails, then place the top of the frame down and crossways in the case,
and with a tack hammer drive your nails. Place the next frame by the
side of this first, corresponding as built in the hive, if it can be;
and place them so as slightly to touch. In filling the last end of the
case, place an iron rod on the head of the nail to drive it, as you
cannot play the hammer.
When the case is full, take two strips (common lath) just long enough
and wide enough to fill the case tightly from end to end, and cover the
ends of the frames and fit tightly against the sides of the case; drive
an inch nail through the strips in the end piece of each frame, and the
frames will be perfectly solid.
I shipped from one to two hundred pounds in a case, in this manner, and
Mr. Perrine tells me the average was not over two frames broken down per
case, and no loss from leakage, the boxes being pitched inside.
A. SALISBURY.
_Camargo, Ills._, Sept. 6, 1870.
[For the American Bee Journal.]
The New Smoker.
I introduce to the notice of bee-keepers a new smoker for bees,
believing it will be pronounced the best, until a better one is found.
It will be found the best for ease of lighting, and to retain fire, and
as burning with equal facility, rotten wood, old rags, or a combination
of wood and rags; and it will not annoy the operator every few minutes
by going out.
To make one, procure a piece of wove wire; I use very fine wire cloth,
but suppose that a coarser article will answer. The piece should be
twelve inches wide and from twelve to eighteen inches long. Take of old
rags a sufficient quantity to make a roll about 2 or 2½ inches thick and
twelve inches long. Roll the rags evenly and firmly together, and then
lay them at one end of the sheet of wove wire, and roll the wove wire
over them pretty tightly, and bind with wire. Light at one end with a
match; and your smoker, if nicely made, will burn from two to four
hours. Or if it be only half filled with rags, then fill out lightly
with damp rotten wood, and you will have a big smudge.
JOHN M. PRICE.
_Buffalo Grove, Iowa._
[For the American Bee Journal.]
Reply to Mr. Worthington’s Inquiry.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account