We frequently find that the possessor of a stock of bees in a cottager's _common_ straw hive is desirous of removing the whole stock, with brood and comb, into one of our improved hives, in which the honey may be obtained without the destruction of the bees. We mostly discourage such a transfer, attended as it is with much labour, and requiring a considerable amount of apiarian skill. An old-fashioned hive may very readily be turned into a humane one, simply by cutting out the middle of the top of the hive with a sharp-pointed knife; a piece may thus easily be taken out, so as to leave a round hole two or three inches in diameter, taking care that the knife does not penetrate much below the straw, lest it reach the comb or the bees. There should be ready a round adapting-board, with a corresponding hole, which may be secured on the top by putting four long nails through the same number of holes in the board; then a cap-hive or a glass may be placed on the top, for the purpose of admitting the bees, who will soon crowd therein to work. This hive or glass will form a super or depriving-hive, and can be worked as profitably as most of the improved hives. For the sake of more sightly appearance, an outside case, either of zinc, straw, or wood, may now be dropped over all, and then, if well painted, the whole will form no disfigurement to any flower-garden. This is, beyond doubt, the easiest way of overcoming the difficulty, but as it may not satisfy all, we will now proceed to describe how a complete transfer of colonies may be effected. No hive offers such facilities for the placing of the combs in a perfectly upright position as does the frame hive. As before remarked, we should be slow to recommend any one to attempt the operation who is not already pretty well accustomed to the handling of bees and acquainted with their habits; but by carefully carrying out the following directions an apt bee-keeper may successfully perform the feat. The first thing is to get the bees away from the combs: there are two ways of doing this--one is by fumigation (see page 207), the other by driving (page 226). Whichever plan may be resorted to, place the bees in the temporary hive on their old stand until you are quite ready to admit them into the frame hive. Have in readiness all the necessary appliances. These consist of a large knife for cutting the hive, a good-sized table on which to lay the brood combs, a basin of water--for washing off honey which may besmear the hands--tape or string to fasten the combs in their frames, a pair of honey-cutters (page 193) for cutting out the combs, jars to hold the honey that runs out, and a feather for brushing off any bees that may remain. It is necessary that the operator should have on his bee dress and india-rubber gloves. If the old skep is not valued the operation will be facilitated by cutting it in half vertically between the two middle combs; but the honey-cutters will